Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Carpenters are trained to work with wood. That means that any part of your home that is built of wood is very likely to involve a carpenter. Framing carpenters will put up the wood that makes up the bones of your home. If you’re having a wood floor installed, it may be done by a carpenter — although being a carpenter is not a requirement to install flooring. Trim, baseboards, wainscoting and any other detail work is typically installed by a finish carpenter. The wood boxes of custom cabinets will be built and installed by a carpenter.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
The amazing 15-inch hand saw has special ‘triple ground’ extra sharp teeth that can cut and rip through wood three times faster than other similar hand saws. The universal tooth grind is designed to remove material quickly, and its innovative design combines the speed of a coarse-cutting saw with the finish of a fine-cutting saw, so you can expect a clean and accurate cutting action.

An excellent introduction to woodworking is to use crates as your main material. The boxes are already formed, which means less assembly work for you—yet it looks impressive once your project is altogether. With this crate coffee table, you still get to practice your skills adding the casters and the center box. Finish with a little stain, and this table is ready to roll. You can find the full tutorial at DIY Vintage Chic. 
It has a narrow and tapered blade, usually pointed at the end. A compass saw typically has about 8-10 teeth per inch, which can go up to 20 teeth per inch if you are cutting harder materials. A compass saw comes with a pistol grip, which is best suited if you are working in confined places. The pointed end helps you penetrate soft materials without requiring a pilot hole.
The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.
Woodworking power tools include various saws for cutting the wood to size and drills for creating holes. Sand pieces down to the finish you want before you sand with portable sanders. Use drivers to install woodworking fasteners for a durable final piece. Cleverly designed rotary tools feature removable bits that can drill, drive, sand, cut and more, so you can use a single tool to accomplish virtually every task of your project. For a production-level project, nail guns can save you hours or even days depending on the work involved.

This can be an elegant centerpiece of your patio furniture or room furniture. Building this project does not need any professional skills, but anyone with basic woodworking knowledge and skills can build this project easily. This project will take three or four hours of your time to build, or can be a day if you take some breaks during the work as I did.


Woodworking is a great stress-reliever, art and hobby. But it takes a skilled hand, a sharp eye and plenty of patience to fully master the fundamentals of building with woods creatively. And I must admit, the journey isn’t as easy as it seems. So, I started searching online the easy yet inexpensive woodworking projects for beginners and came up with 45 on the list which we will talk later.
This practical entryway storage unit is made from solid wood and is glued together: no nails or screws (apart from those that hold it to the wall) are used. In this case, we made it out of soft maple, but it could be made from any good quality solid wood: pine, oak, birch, fir…whatever best matches the trim or furnishings in the place where it will be mounted to the wall.
If you can only afford one initial hand saw, then get a rip saw. A rip saw can indeed make cross cuts (cutting the board to length) though it will require more cleaning up than if you use a cross cut hand saw (read more below). But it is much more difficult to rip a long board with a cross-cut saw. Rip saws are simple to sharpen and refurbish. I have a good number of rip hand saws from different saw makers, but mostly Disston saws. If you find multiple old hand saws for a good price, you can certainly sharpen and set them in different ways to make certain jobs easier. Some of the desirable models of Disston saws are the Disston #16 hand saw, Disston #D-8 hand saw (with thumb holes is desireable), Disston #12 hand saw, among others.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.
A dozuki saw has a thin, flexible blade, with fine teeth and a straight handle, which makes it well-suited to flush-cutting pegs. The flexible tip helps it get close to the base of a pin, and the straight handle is easier to hold and control with the saw on its side than a pistol grip would be. Get a crosscut dozuki with about 20 tpi. So why not just use a flush-cut saw? Their teeth have no set, so they clog and don’t cut as well. Dozukis don’t have those problems. The thin blade can kink, so get a saw with a replaceable blade.
This design is oh-so classy and beautiful and it’s one of the finest woodworking projects you’ll want to build today! You can display potted flowers, a cute clock, and a couple of picture frames on this DIY circular wood shelf. It's effortlessly beautiful and easy to build! If you're also looking for Mother's Day crafts, you can include this on your list.
×