The worst part of the job for me is dealing with legal matters and paperwork. There may not be a lot, and hiring an accountant and lawyer removes much of the burden, but it still seems like I’m filling out a form or making a phone call at least once a week to deal with red-tape. Even something as simple as setting up to buy from a new supplier can require filling out and submitting a tax document. We did have to spend a half hour unloading a wood delivery in freezing rain once, which was a terrible experience, but still not as bad as the constant need to fill IRS forms.
Back saws have fine teeth and thin metal saw plates, and are used for making precision wood cuts. They have rigid brass or steel backs to keep the saw plate from bending, which provides rigidity for accurate cuts of wood joints. The smaller the saw teeth, the finer the cut. Historically, back saws were used primarily by joiners and cabinetmakers, and are typically more expensive than normal hand saws. 
Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.
A clean well-organized environment is key to staying A clean well-organized environment is key to staying happy. The same goes for your desk. Keep the clutter at bay and organize all of your small essentials with the Dickies Work Gear 57012 Mug Organizer. Designed to fit over most mugs this clever caddy features 8 outer pockets and 6 ...  More + Product Details Close

There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.

The third tool for the beginner is the Jigsaw. A jigsaw allows the user to cut curved and circular patterns in stock. Sure, a band saw will likely be more accurate and can cut thicker stock, but for the beginner, the jigsaw (sometimes also referred to as a Sabre Saw) can be perfectly effective. For versatility, choose an orbital-action, corded jigsaw that feels good in your hand and has an easy blade changing system.
I suggest that the aspiring woodworker learn all the skills he or she can acquire, from traditional skills such as carving, wood turning, and traditional joinery, to modern skills such as CAD and CNC. The more versatile you are, the more valuable you can be to more people. Never stop trying to learn new things, and always keep your eyes and ears open and your mouth closed. Never oversell your skills to a prospective employer. If you don’t know how to do something, admit it, and get to work learning how to do it. Don’t be afraid to take on something you’ve never done. A skilled custom woodworker draws on experience and skill to accomplish things he’s never done before. Custom work often requires you to reinvent the wheel on a daily basis. Always remember that no matter how much experience you have, you never know everything, and there’s always something else to learn. Along with the actual skills involved with the trade, you also need to educate yourself about wood. You need to be able to recognize a myriad of wood species and be familiar with their individual characteristics and uses. 

Every project needs a tutorial to build, same for this project, you need a tutorial to build the project. So, we are including a source tutorial of this project in the link below. The source tutorial includes images and diagrams in every step. You can understand the whole process of this project in the step by step tutorial given below. So let’s have a fun.
Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
This super easy recycled pallet Christmas tree created by using some pallets is one of my favorite DIY projects. It might have all the components of your craft, a little bit new but rustic Christmas tree. It is perfect for both outdoor and indoor décor pieces! We are including the source tutorial for this DIY project below. Source tutorial includes step by step details of this process with diagrams and images.

This information is taken directly from the Occupational Outlook Handbook published by the US Bureau of Labor Statistics. Truity does not editorialize the information, including changing information that our readers believe is inaccurate, because we consider the BLS to be the authority on occupational information. However, if you would like to correct a typo or other technical error, you can reach us at help@truity.com.
Using these floating shelves in your room or kitchen is a great way to arrange and de-clutter space… I know, such groundbreaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.

"Cody did such a incredible job! He not only gave me my dream kitchen, but he was also so personable, professional, and kind. While he was here I also had some other things that needed fixed around the house and he was happy to help with. A master of all trades. 10/10 have recommended to all my friends and will have him do future things to our home when needed."


Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.
Woodworkers use geometry, arithmetic, algebra, calculus, and statistics to measure materials and during the planning stages of projects.  On any given job, they will calculate sizes, dimensions, distances, and quantities of materials.  Computer skills and knowledge of relevant software also benefits woodworkers with job-estimating, project management, and basic spreadsheet or word processing.  Woodworkers should be detail-oriented, have good people skills, have steady hands, and physical strength, especially when lifting 100-pound sheets of plywood.
The amazing 15-inch hand saw has special ‘triple ground’ extra sharp teeth that can cut and rip through wood three times faster than other similar hand saws. The universal tooth grind is designed to remove material quickly, and its innovative design combines the speed of a coarse-cutting saw with the finish of a fine-cutting saw, so you can expect a clean and accurate cutting action.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
If you are cutting across the grain of the wood, you need a cross cut saw. The teeth on a cross cut saw are angled straight up and have a beveled edge like a knife point. This cross cutting design allows the saw to act like a sharp knife that cleanly slices across the wood’s grain and severs each of the fibers. When you use the cross cut saw, you use a push and pull action.
Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
Some more coat rack designs and ideas can be found on the internet. Select any one if you are not comfortable with the two, we have included above. And, we also managed to include a link where you can find various awesome coat rack ideas. Check that link and select the one which matches your woodworking skills. Also, feel free to ask questions if you have in the comment section of this post.
In the source tutorial below, you will find a DIY project ‘s step by step building details. This tutorial is a wood pallet planter which is shown in the image above. And also, this project doesn’t need you to be a professional woodworker, but with some basic woodworking skills and knowledge, you can this inexpensive wood planter.Just click on the link below, read it once carefully and start a plan to build this one.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
If you can only afford one initial hand saw, then get a rip saw. A rip saw can indeed make cross cuts (cutting the board to length) though it will require more cleaning up than if you use a cross cut hand saw (read more below). But it is much more difficult to rip a long board with a cross-cut saw. Rip saws are simple to sharpen and refurbish. I have a good number of rip hand saws from different saw makers, but mostly Disston saws. If you find multiple old hand saws for a good price, you can certainly sharpen and set them in different ways to make certain jobs easier. Some of the desirable models of Disston saws are the Disston #16 hand saw, Disston #D-8 hand saw (with thumb holes is desireable), Disston #12 hand saw, among others.
As part of the job, woodworkers prepare and operate saws, drill presses, routers, sanders, lathes, shapers, milling machines, and planers.  Often using a template, woodworkers measure and verify dimensions, cut, and shape wooden parts. Woodworkers stain or coat the wood products with sealers and topcoats, such as varnish and lacquer. But, they also often install hardware, fit electrical components and specialty products, such as metal trims and glass.
As part of the job, woodworkers prepare and operate saws, drill presses, routers, sanders, lathes, shapers, milling machines, and planers.  Often using a template, woodworkers measure and verify dimensions, cut, and shape wooden parts. Woodworkers stain or coat the wood products with sealers and topcoats, such as varnish and lacquer. But, they also often install hardware, fit electrical components and specialty products, such as metal trims and glass.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.
For an artisanal look, you can use woodworking hand tools. These are easy to use, lightweight and require no batteries or power cords to operate. Many hand tools are covered by multi-year or even lifetime warranties for extra protection and value. Set up your pieces with the most expertly crafted woodworking hardware, such as hinges, pulls and knobs to create a final product that you can give as a gift, sell or just display proudly.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
×