In the source tutorial below, you will find a DIY project ‘s step by step building details. This tutorial is a wood pallet planter which is shown in the image above. And also, this project doesn’t need you to be a professional woodworker, but with some basic woodworking skills and knowledge, you can this inexpensive wood planter.Just click on the link below, read it once carefully and start a plan to build this one.

My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet.


Because the Dozuki has such a finely produced blade (if it is a quality saw) then the smallest of deflection while using one hand allows it to track away from your intended cut. Note: If you hold one hand out in front of you with no saw in it, and your hand folded as if you were holding the saw, then pull your hand back as if you were cutting (without trying to keep it straight), you will notice that your hand will twist usually to the inside, but not always--there lies the problem--since you need only one stroke to throw the tracking off.

There are many other great tutorials you can find on the internet, but they all need many tools to build. You might not have a table saw, a router, or miter saw and of course, it costs hundreds of dollars. And you can sell this Deck cooler at almost no cost and make a handsome profit. By having a drill and impact driver plus any type of saw, you can build it easily.


This creative picture frame project will blow your mind and you will start loving it. It’s obviously a cool wooden upcycling idea for DIY decorating at no cost. I just love the vintage look of these picture frames and think you will, too. Especially, when you will get to know how easy is it to build these picture frames at no cost. These wooden frames can make you a handsome profit when you went to sell them.
Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!

Any serious woodworker knows that square and flat Any serious woodworker knows that square and flat stock is the key to producing fine work so it’s time to skip the hand tools and graduate to the JJ-6HHDX 6 in. long bed jointer. This beast boasts a helical insert cutter head with staggered carbide inserts yet runs quietly and ...  More + Product Details Close
Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a Pallet dining table. So, I searched for a plan design idea and build a very own beautiful pallet dining table. I was an amazing DIY plan, I just love it!
The number of saw teeth per inch (or points per inch) is another important factor in selecting a hand saw for a particular purpose. Large hand saw teeth will cut quickly through the wood, but will leave a rough surface. Small hand saw teeth will cut finely and accurately, but are not practical for cutting long lengths or widths. When dealing with normal hand saws or frame saws, “Rip” teeth are typically larger than “Cross Cut” teeth. In back saws, rip and cross-cut teeth can vary in size. The number of teeth per inch are usually expressed as “points per inch” (ppi) or “teeth per inch” (tpi) and the number is usually stamped into the saw plate. However, you can change the tooth count during your sharpening. Here are examples of large (rough) and small (fine) hand saw teeth:
My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet.
Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.

Currently we offer FREE FedEx/UPS small package Ground shipping and FREE ABF/YRC freight ground shipping on most orders of $49 or more within the 48 contiguous states. Some irregular shaped or oversized items may include a special handling charge. The charge will show on the product detail page of applicable products. Offer subject to change without notice.


A dozuki saw has a thin, flexible blade, with fine teeth and a straight handle, which makes it well-suited to flush-cutting pegs. The flexible tip helps it get close to the base of a pin, and the straight handle is easier to hold and control with the saw on its side than a pistol grip would be. Get a crosscut dozuki with about 20 tpi. So why not just use a flush-cut saw? Their teeth have no set, so they clog and don’t cut as well. Dozukis don’t have those problems. The thin blade can kink, so get a saw with a replaceable blade.
×