When you are making a cut with the grain of the wood, use a ripsaw. In comparison with a cross cut saw, the teeth on a ripsaw are angled to the left and they are not beveled. The teeth bend left and right in an alternating pattern, which allows each tooth to act like a chisel that chips away small pieces of wood as you saw along the wood grain. Also, the rip saw's blade cuts on the push stroke, not on the push and pull stroke, like you would with a cross cutting hand saw.
Silky offers the ultimate professional woodworking and carpentry saws for both the professional and hobbyist. Laser-cut, impulse hardened blades for exceptional performance and incredibly long service life are the hallmark of all Silky woodworking saws. All Silky woodworking saws use unique alloy steel engineered and produced exclusively for Silky Saws.
Carpenters are trained to work with wood. That means that any part of your home that is built of wood is very likely to involve a carpenter. Framing carpenters will put up the wood that makes up the bones of your home. If you’re having a wood floor installed, it may be done by a carpenter — although being a carpenter is not a requirement to install flooring. Trim, baseboards, wainscoting and any other detail work is typically installed by a finish carpenter. The wood boxes of custom cabinets will be built and installed by a carpenter.
My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet.

With its thin blade and tall frame, the coping saw is adept at cutting curves. It was used in the past to cope molding to get perfect miters. But I use it when cutting dovetails. I was taught to chop out all of the waste with a chisel-a tedious job. When I tried sawing out the waste with a coping saw, it was a watershed moment for me and I’ll never go back. You don’t need a superexpensive frame, but don’t go with a hardware store cheapy, either. I spent about $20 on mine and it’s easy to tighten and adjust the blade. The handle is comfortable, too. As for blades, get ones with a fine cut. They cut slower, which means the saw is less likely to jump the kerf at the end of the cut and damage the tail or pin.
I learned about the trade from my father starting when I was 6 years old. I took woodshop courses in high school, and was granted the Industrial Arts Award my senior year. I also took some college courses in woodshop before I started my own business when I turned 19.My average work day is laying out jobs, cutting parts, designing the different jobs, and assembling the cabinets. I also am teaching my daughter how to build woodworking projects and cabinet parts, as well as helping with our cutting boards.
But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
A hand saw is an indispensable hand tool that offers you a lot of cutting versatility. It can be used for all sorts of projects or tasks, like trimming tree limbs, cutting up hardwood lumber from a felled tree, building a house, cutting up floor boards for a home renovation, fine detailed joinery work, or cutting through PVC plastic pipes. Whatever type of cutting you you have to do, the hand saw can do it all.

There are many factors to consider when deciding what type of wood to use for a project. One of the most important is the workability of the wood: the way in which it responds when worked by hand or tools, the quality of the grain, and how it responds to adhesives and finishes.[9] When the workability of wood is high, it offers a lower resistance when cutting and has a diminished blunting effect on tools.[9] Highly workable wood is easier to manipulate into desired forms. If the wood grain is straight and even, it will be much easier to create strong and durable glued joints. Additionally, it will help protect the wood from splitting when nailed or screwed.[9] Coarse grains require a lengthy process of filing and rubbing down the grain to produce a smooth result.[9]
Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.
"Mike was referred to me by a family member. I enjoyed his attitude and attentiveness to what my ideas were for my basement. He did the framing in the basement and built two bedrooms and added the bathroom. He was a huge help in designing the area because I needed the bedrooms to be built where the egress windows are. He was always professional and responsive. I highly recommend Mike to anyone needing a carpenter for anything."
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
×