This cat tree pallet house project could help you to build something durable with excellent living conditions for your cat. This cat tree house is unique and hand crafted. This could also satisfy the cat’s needs and wishes. This will give your cat a room play, jump, explore and also a comfortable sleep. This cat house looks very attractive and perfectly matched with trees. This is not only a cat house but can also be a piece of décor in your home. The trees used are natural, that is why this piece of pallets is for indoor only. You can find the further information and details about this cool cat tree house in the source tutorial.
The saw's blade is precision set and has extra sharpened teeth and it has a good amount of flexibility to give you that much-needed cutting control for all sorts of cross grain cuts. For indoor and outdoor use, the GreatNeck has a weather-resistant dark stained hardwood handle and it is very comfortable to hold. The GreatNeck hand saw is covered by a lifetime warranty.
With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.

Whatever types of cutting task you need to perform, from rough cuts to finer cuts that need more operator control, the patent-pending blue and yellow handle has a unique design that eliminates binding and delivers full blade strokes, and the high-density resin has been molded into an ergonomic shape, which is very comfortable to hold and reduces any hand fatigue.

Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.


Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
This super easy recycled pallet Christmas tree created by using some pallets is one of my favorite DIY projects. It might have all the components of your craft, a little bit new but rustic Christmas tree. It is perfect for both outdoor and indoor décor pieces! We are including the source tutorial for this DIY project below. Source tutorial includes step by step details of this process with diagrams and images.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster. 

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
These 25 projects are absolutely stunning, to say the least. I would love to try out some of these designs all by myself and get started with some serious woodworking that I have been procrastinating for a long time. My favorites among these 25 are definitely the desk organizer, the bowling lane, and the tiered planter, but nevertheless, all are good in their own ways. I believe these projects only require hand tools and basic power tools like a rudimentary router and a jigsaw.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
The last tool I recommend for every beginning woodworker is a quality router. While many routers available today offer two different bases (a stationary base and a plunge router base), for most beginners, a quality stationary base model will take care of quite a number of tasks, and can also be mounted in a router table should you choose to invest in (or even build one) one down the line. Choose a router model that is at least 2-HP and has electronic variable speed controls (as larger cutting bits should use slower speeds), a soft start mechanism and is easy to make bit changes (preferably with the ability to use both 1/2-inch and 1/4-inch shank router bits).
Some woodworkers obtain their skills by taking courses at technical schools or community colleges. Others attend universities that offer training in wood technology, furniture manufacturing, wood engineering, and production management. These programs prepare students for jobs in production, supervision, engineering, and management, and are becoming increasingly important as woodworking technology advances.
This creative picture frame project will blow your mind and you will start loving it. It’s obviously a cool wooden upcycling idea for DIY decorating at no cost. I just love the vintage look of these picture frames and think you will, too. Especially, when you will get to know how easy is it to build these picture frames at no cost. These wooden frames can make you a handsome profit when you went to sell them.
Whatever types of cutting task you need to perform, from rough cuts to finer cuts that need more operator control, the patent-pending blue and yellow handle has a unique design that eliminates binding and delivers full blade strokes, and the high-density resin has been molded into an ergonomic shape, which is very comfortable to hold and reduces any hand fatigue.
Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need.

Not every one of us is a fan of wine, but you can’t deny that every house might have a bottle or two that were maybe a gift for any special occasion. So, if you are planning on keeping such wine bottles and popping them for another special occasion, then you have to keep them properly. Keep your favorite wines within reach for some dinner parties and holiday gatherings with one of these well-constructed wine racks.


I really like building difficult cabinets, laying them out, and assembling them. It really gives me a challenge to build something better each time, but the sanding and clean up are not my favorite aspects of this work; you better get used to it. And I wish I would have taken some business classes because the part of running a business is another element added to cabinet making.

Following is everything you need to know about a career as a woodworker with lots of details. As a first step, take a look at some of the following jobs, which are real jobs with real employers. You will be able to see the very real job career requirements for employers who are actively hiring. The link will open in a new tab so that you can come back to this page to continue reading about the career:


Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings. Animal glue came to be used only in the New Kingdom period.[3] Ancient Egyptians invented the art of veneering and used varnishes for finishing, though the composition of these varnishes is unknown. Although different native acacias were used, as was the wood from the local sycamore and tamarisk trees, deforestation in the Nile valley resulted in the need for the importation of wood, notably cedar, but also Aleppo pine, boxwood and oak, starting from the Second Dynasty.[4]

Woodworkers will find every tool needed to complete professional jobs and hobby projects. Outfit your workshop with routers and sanders, table saws and dust collectors, Fein MultiMasters, and Sonicrafters. Amazon.com carries the woodworking precision machinery and essential tools you need to frame, cut, carve, saw, drill, sand, trim, craft, and finish your masterpiece. Discover the bestselling brands including Makita, Festool, Bosch, JET, Powermatic, Rockler, Grizzly, and more in the Woodworking Shop at Amazon.com. The comprehensive selection of wood chisels, lathes, jig saws, hardware, and woodworking plans will equip carpenters and woodturners. FREE Super Saver Shipping is available for select items.

What I like most about my work is the satisfaction of building something useful and attractive, or even beautiful, out of a pile of raw materials. There is nothing more satisfying than when a complex piece, composed of dozens of parts, each one individually handmade, comes together. The thing I like the least is the business side, such as bookkeeping, promoting my business, etc. If you have a mind for business and the talent to create, this would be the perfect combination.


Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
Whether you are a DIY home maintenance enthusiast or a professional tradesman, the Irwin Tools hand saw is the only saw you will ever need. A super fast cutting tool, the Irwin Tools Universal hand saw will have you powering through all sorts of cutting-related tasks from detailed woodworking, carpentry or general DIY maintenance and its compact blade means it is easy to use in tight spots.
I really like building difficult cabinets, laying them out, and assembling them. It really gives me a challenge to build something better each time, but the sanding and clean up are not my favorite aspects of this work; you better get used to it. And I wish I would have taken some business classes because the part of running a business is another element added to cabinet making.
If you can only afford one initial hand saw, then get a rip saw. A rip saw can indeed make cross cuts (cutting the board to length) though it will require more cleaning up than if you use a cross cut hand saw (read more below). But it is much more difficult to rip a long board with a cross-cut saw. Rip saws are simple to sharpen and refurbish. I have a good number of rip hand saws from different saw makers, but mostly Disston saws. If you find multiple old hand saws for a good price, you can certainly sharpen and set them in different ways to make certain jobs easier. Some of the desirable models of Disston saws are the Disston #16 hand saw, Disston #D-8 hand saw (with thumb holes is desireable), Disston #12 hand saw, among others.
Shorter hand saws (around 20-inches long) are officially called “panel saws” because they can fit in the panel of a large tool chest, and they are more suited for fine furniture making. Most normal hand saws run from 24-inches to 30-inches long. Many people mistakenly call all saws of this type “panel saws”. But don’t be rude and correct them! Try out different sizes to see what length you’re comfortable with.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
There are two types of electric circular saws, the worm drive and the sidewinder. The worm drive saw has enough torque to cut through wet lumber and concrete. The behind-the-blade handle placement reduces kickback, and the blade’s left-side position makes it easy to see your cut line if you’re right-handed. The sidewinder’s motor, attached directly to the blade, weighs less but also has less torque.
Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.

Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.
If you have more complex woodworking or carpentry jobs, choose a hand saw that is tailor made for these tasks like the Vaughan BS240P Pull Stroke Rip Handsaw or the Crown FLINN1 10-Inch Dovetail Saw. Also, the type of hand saw will depend on whether you be cutting with the grain or across the grain. There are 3 main types of basic hand saws: a cross cutting saw, a rip saw, and a dovetail back saw. 

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!

Softwood is most commonly found in the regions of the world with lower temperatures and is typically less durable, lighter in weight, and more vulnerable to pests and fungal attacks in comparison to hardwoods. They typically have a paler color and a more open grain than hardwoods, which contributes to the tendency of felled softwood to shrink and swell as it dries.[9] Softwoods usually have a lower density, around 25-37lb/cu ft, which can compromise its strength.[9] Density, however, does vary within both softwoods and hardwoods depending on the wood's geographical origin and growth rate. However, the lower density of softwoods also allows it to have a greater strength with lighter weight. In the United States, softwoods are typically cheaper and more readily available and accessible.[9] Most softwoods are suitable for general construction, especially framing, trim, and finish work, and carcassing.[10][9]


This can be an elegant centerpiece of your patio furniture or room furniture. Building this project does not need any professional skills, but anyone with basic woodworking knowledge and skills can build this project easily. This project will take three or four hours of your time to build, or can be a day if you take some breaks during the work as I did.

If a woodworker wishes to advance in the field or to demonstrate competence in the industry, they may also choose to become licensed. The Woodwork Career Alliance of North America offers a national certificate program. The AWI, or Architectural Woodwork Institute sets standards for the industry and offers training programs for management and mid-management positions.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.


As part of the job, woodworkers prepare and operate saws, drill presses, routers, sanders, lathes, shapers, milling machines, and planers.  Often using a template, woodworkers measure and verify dimensions, cut, and shape wooden parts. Woodworkers stain or coat the wood products with sealers and topcoats, such as varnish and lacquer. But, they also often install hardware, fit electrical components and specialty products, such as metal trims and glass.
Back saws have fine teeth and thin metal saw plates, and are used for making precision wood cuts. They have rigid brass or steel backs to keep the saw plate from bending, which provides rigidity for accurate cuts of wood joints. The smaller the saw teeth, the finer the cut. Historically, back saws were used primarily by joiners and cabinetmakers, and are typically more expensive than normal hand saws. 

Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:


Whatever types of cutting task you need to perform, from rough cuts to finer cuts that need more operator control, the patent-pending blue and yellow handle has a unique design that eliminates binding and delivers full blade strokes, and the high-density resin has been molded into an ergonomic shape, which is very comfortable to hold and reduces any hand fatigue.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Woodworkers use geometry, arithmetic, algebra, calculus, and statistics to measure materials and during the planning stages of projects.  On any given job, they will calculate sizes, dimensions, distances, and quantities of materials.  Computer skills and knowledge of relevant software also benefits woodworkers with job-estimating, project management, and basic spreadsheet or word processing.  Woodworkers should be detail-oriented, have good people skills, have steady hands, and physical strength, especially when lifting 100-pound sheets of plywood.
Working with reclaimed wood is a savvy use of resources, and the material's country appeal is undeniable. With just a saw and a small drill, you can reuse old fencing to make these simple woodworking projects: picket-inspired picture frames. Finish them off by hot-gluing clothespins or bulldog clips to hang your prints. Here’s a step-by-step guide.
Shorter hand saws (around 20-inches long) are officially called “panel saws” because they can fit in the panel of a large tool chest, and they are more suited for fine furniture making. Most normal hand saws run from 24-inches to 30-inches long. Many people mistakenly call all saws of this type “panel saws”. But don’t be rude and correct them! Try out different sizes to see what length you’re comfortable with.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
This super easy recycled pallet Christmas tree created by using some pallets is one of my favorite DIY projects. It might have all the components of your craft, a little bit new but rustic Christmas tree. It is perfect for both outdoor and indoor décor pieces! We are including the source tutorial for this DIY project below. Source tutorial includes step by step details of this process with diagrams and images.
If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.
Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need.

Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need.
Some more coat rack designs and ideas can be found on the internet. Select any one if you are not comfortable with the two, we have included above. And, we also managed to include a link where you can find various awesome coat rack ideas. Check that link and select the one which matches your woodworking skills. Also, feel free to ask questions if you have in the comment section of this post.
Although the term “woodworker” may evoke the image of a craftsman who uses hand tools to build ornate furniture, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work with great accuracy.

Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.

×