There are two types of electric circular saws, the worm drive and the sidewinder. The worm drive saw has enough torque to cut through wet lumber and concrete. The behind-the-blade handle placement reduces kickback, and the blade’s left-side position makes it easy to see your cut line if you’re right-handed. The sidewinder’s motor, attached directly to the blade, weighs less but also has less torque.
This list has some great beginner projects to spark your inspiration; from the simple to the more elaborate. Does building furniture interest you more than making boxes? We found some projects for you that are easy to follow along with and learn the basics that you need to move on to more challenging projects. We hope that this list inspires your next project!
The hand saw has a greater TPI, 17 teeth-per-inch, which provides a clean and precise cut and the 1½- inch blade is made from hardened steel with extra brass backing which gives the blade that extra strength to cut through all types of wood, soft and hardwood, and gives it additional resistance to any wear or tear or corrosion, so you can be confident of high-quality results.
Softwood is most commonly found in the regions of the world with lower temperatures and is typically less durable, lighter in weight, and more vulnerable to pests and fungal attacks in comparison to hardwoods. They typically have a paler color and a more open grain than hardwoods, which contributes to the tendency of felled softwood to shrink and swell as it dries.[9] Softwoods usually have a lower density, around 25-37lb/cu ft, which can compromise its strength.[9] Density, however, does vary within both softwoods and hardwoods depending on the wood's geographical origin and growth rate. However, the lower density of softwoods also allows it to have a greater strength with lighter weight. In the United States, softwoods are typically cheaper and more readily available and accessible.[9] Most softwoods are suitable for general construction, especially framing, trim, and finish work, and carcassing.[10][9]
This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.
With its thin blade and tall frame, the coping saw is adept at cutting curves. It was used in the past to cope molding to get perfect miters. But I use it when cutting dovetails. I was taught to chop out all of the waste with a chisel-a tedious job. When I tried sawing out the waste with a coping saw, it was a watershed moment for me and I’ll never go back. You don’t need a superexpensive frame, but don’t go with a hardware store cheapy, either. I spent about $20 on mine and it’s easy to tighten and adjust the blade. The handle is comfortable, too. As for blades, get ones with a fine cut. They cut slower, which means the saw is less likely to jump the kerf at the end of the cut and damage the tail or pin.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.


"Mike was referred to me by a family member. I enjoyed his attitude and attentiveness to what my ideas were for my basement. He did the framing in the basement and built two bedrooms and added the bathroom. He was a huge help in designing the area because I needed the bedrooms to be built where the egress windows are. He was always professional and responsive. I highly recommend Mike to anyone needing a carpenter for anything."
Whether you are a professional tradesman or a DIY home renovation enthusiast, you need a sharp and sturdy hand saw. One of the common types of manual cutting hand tools, a hand saw is a highly versatile tool that can be used for all sorts of indoor and outdoor projects, from woodworking to carpentry tasks, to home renovations or general maintenance jobs.
If you’ve ever found yourself at the lumberyard with several boards that are too long for the bed of your truck, you’ll appreciate having a panel saw. Carrying around a circular saw and hoping to find an outlet is more hassle than it’s worth. But leaving a panel saw (8 to 12 tpi) in the truck is no problem. Lay the boards in the bed with the gate down, and cut them to fit. I even use a panel saw in the shop to cut a board to rough length when it’s too big for my chopsaw.
This can be an elegant centerpiece of your patio furniture or room furniture. Building this project does not need any professional skills, but anyone with basic woodworking knowledge and skills can build this project easily. This project will take three or four hours of your time to build, or can be a day if you take some breaks during the work as I did.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Although not required, becoming certified can demonstrate competence and professionalism. It also may help a candidate advance in the profession. The Architectural Woodwork Institute (AWI) offers a national certificate program, which adds a level of credibility to the work of woodworkers. The Woodwork Career Alliance of North America also offers five progressive credentials.
This project needs some professional skills to build, but it never ever means that you can’t do it. If I did it, then you can do it too. And, you can build one for elders too, and put it in your garden or patio or anywhere in your home. Although this is really a beautiful project, this can make you earn some profit. People love to have something loving for their kids, so they will get interested in buying this wooden piece at first look.
Because the Dozuki has such a finely produced blade (if it is a quality saw) then the smallest of deflection while using one hand allows it to track away from your intended cut. Note: If you hold one hand out in front of you with no saw in it, and your hand folded as if you were holding the saw, then pull your hand back as if you were cutting (without trying to keep it straight), you will notice that your hand will twist usually to the inside, but not always--there lies the problem--since you need only one stroke to throw the tracking off.
×