Hand saw blades are usually sharpened to two different tooth configurations, “Rip” and “Cross Cut”. You can change any saw’s tooth shape with saw sharpening tools.  There is also a hybrid hand saw tooth configuration that is in between a Rip and Cross-cut shape, called a “Sash” tooth configuration, which is useful if you can only afford one hand saw…but it’s not as proficient at either ripping or cross-cutting). Here are some tooth shape diagrams:

Of course, there’s the occasional install, client meeting or photo-shoot, but those don’t happen often enough to be considered a typical day. I should mention that every day brings its share of phone conversations with clients and suppliers. That happens at all hours. Most work days end by 7:30pm, and once I’m home and have eaten supper, I’ll usually put another hour into handling whatever financial, legal or internet tasks are most pressing at the time. Altogether, a typical work day is about 12 hours, and this is 6 days a week. At 2 1/2 years old, the business is still a start-up which is the reason such long hours are necessary.


Historically, woodworkers relied upon the woods native to their region, until transportation and trade innovations made more exotic woods available to the craftsman. Woods are typically sorted into three basic types: hardwoods typified by tight grain and derived from broadleaf trees, softwoods from coniferous trees, and man-made materials such as plywood and MDF.

Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings. Animal glue came to be used only in the New Kingdom period.[3] Ancient Egyptians invented the art of veneering and used varnishes for finishing, though the composition of these varnishes is unknown. Although different native acacias were used, as was the wood from the local sycamore and tamarisk trees, deforestation in the Nile valley resulted in the need for the importation of wood, notably cedar, but also Aleppo pine, boxwood and oak, starting from the Second Dynasty.[4]
But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
"Cody did such a incredible job! He not only gave me my dream kitchen, but he was also so personable, professional, and kind. While he was here I also had some other things that needed fixed around the house and he was happy to help with. A master of all trades. 10/10 have recommended to all my friends and will have him do future things to our home when needed."
Sometimes called “Panel Saws”, these hand saws have a handle and thin flexible metal saw plate with no rigid back or frame. Hand saws have larger teeth and are generally used for quickly rough-cutting boards to length or width. These hand saws were manufactured in very large quantities and are easy to find and usually inexpensive. The specific name of this saw type also happens to be the general name of all non-power saws: “hand saw”.
Two children who visit me several times each summer are very fond of trains, both riding on them and playing with them, so I came up with this design. It is not meant to be an authentic model in any way. It is just for the children to play with. The engine and cars feature dovetail joinery details. When someone mentions the words “dovetail joint,” my mind automatically conjures up boxes. A dovetail jig is one of the best ways to make dovetail joint boxes, but a dovetail jig can actually be used to join any two pieces of material together at right angles. This may well be on a box, but it could also be a drawer or, as in this case, parts for a toy train.
Sometimes called “Panel Saws”, these hand saws have a handle and thin flexible metal saw plate with no rigid back or frame. Hand saws have larger teeth and are generally used for quickly rough-cutting boards to length or width. These hand saws were manufactured in very large quantities and are easy to find and usually inexpensive. The specific name of this saw type also happens to be the general name of all non-power saws: “hand saw”.

I regularly use four handsaws in my shop, not because I’m a hand-tool nut but because a handsaw is often the smartest, most efficient choice for the job at hand. Take the job of crosscutting or mitering delicate moldings and miter keys. you could do those tasks at the tablesaw or miter saw, but you’d need to devise a jig to hold the workpiece during the cut, and there’s no guarantee that the spinning blade won’t chew up the workpiece. It’s much quicker, safer, and cleaner to make the cut with a backsaw.


Sometimes when I notice a pattern in the emails I receive and realize that many people are asking the same question, I decide to just go ahead and write a post about it! Because clearly, there’s a need for good and EASY beginner woodworking projects to help those of you that are ready to dip your toe into the amazing and creative world of woodworking.
When you are making a cut with the grain of the wood, use a ripsaw. In comparison with a cross cut saw, the teeth on a ripsaw are angled to the left and they are not beveled. The teeth bend left and right in an alternating pattern, which allows each tooth to act like a chisel that chips away small pieces of wood as you saw along the wood grain. Also, the rip saw's blade cuts on the push stroke, not on the push and pull stroke, like you would with a cross cutting hand saw.
We offer the best hand saws for woodworking. A fine hand saw's image has long been the emblem of a craftsman at work. Used for carpentery, dovetailing, joinery and many other tasks around the shop, we stock a large variety of hand saws. You will find the hand saw you need among our selection of British Bowsaws, Gent's Saws and Tenon Saws, our extensive collection of Japanese Hand Saws, and the fine hand saws of Lie Nielsen. Be sure to check out the newest additions to our Backsaw collection from Bad Axe Tool Works - the ultimate in premium hand saws, made in the USA. Selecting the best hand saws for woodworking can be daunting, to help sort through all the options we recommend reading Essential Woodworking Hand Tools by Author Paul Sellers. His book includes a lengthy chapter on hand saws to help you decide which hand saws you need in your workshop.
"Cody did such a incredible job! He not only gave me my dream kitchen, but he was also so personable, professional, and kind. While he was here I also had some other things that needed fixed around the house and he was happy to help with. A master of all trades. 10/10 have recommended to all my friends and will have him do future things to our home when needed."
Although all of these components in your new or remodeled home are built by carpenters who specialize in building things with wood, a general contractor typically oversees construction of the entire house. If the general contractor is also a carpenter skilled in all these areas, they may well construct your entire home. More often, the general contractor subcontracts out the various building stages to different individuals, including carpenters.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
A dovetail back saw, like the Crown FLINN1 10-Inch Dovetail Saw, is specially designed for working with hard and soft woods and for fine woodworking applications that need very precise, small cuts and a nice neat finish. These types of hand saws are for making dovetail joints where two wood pieces should fit perfectly together. The dovetail saw has a small blade that is more rigid than the cross cutting or rip saw so that it can cut nice straight lines on shorter pieces of wood, and it has more TPI, which means it can create a neater finish. The dovetail hand saw also has a cylindrical handle that can be turned freely in your hand, which gives you greater control over the shape of the cuts you need to make with the wood.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings. Animal glue came to be used only in the New Kingdom period.[3] Ancient Egyptians invented the art of veneering and used varnishes for finishing, though the composition of these varnishes is unknown. Although different native acacias were used, as was the wood from the local sycamore and tamarisk trees, deforestation in the Nile valley resulted in the need for the importation of wood, notably cedar, but also Aleppo pine, boxwood and oak, starting from the Second Dynasty.[4]

I believe there are demos on the use of the Dozuki on a number of sites, but you would, do best watching some from Japan. Also, I think the sites of Japanese Woodworkers Tools and Lee Valley Tools might have some information or you could search "using dozuki saws" or using Japanese saws". If I can locate a good site I'll post it here--Good luck, Mainewood


An excellent introduction to woodworking is to use crates as your main material. The boxes are already formed, which means less assembly work for you—yet it looks impressive once your project is altogether. With this crate coffee table, you still get to practice your skills adding the casters and the center box. Finish with a little stain, and this table is ready to roll. You can find the full tutorial at DIY Vintage Chic. 
I believe there are demos on the use of the Dozuki on a number of sites, but you would, do best watching some from Japan. Also, I think the sites of Japanese Woodworkers Tools and Lee Valley Tools might have some information or you could search "using dozuki saws" or using Japanese saws". If I can locate a good site I'll post it here--Good luck, Mainewood

But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
ANeelyHall.com CLCraft.com ClockPatterns.com ClockProjects.com DownloadWoodworkingPlans.com DollPlans.com FreeWoodworkingPlan.com FreeWoodworkingPlans.info iCraftPatterns.com JigSawPlans.com LandscapeTimberPlans.com PDFWoodworkingPlans.com PlyWoodWorkers.com PlyWoodWorking.com PlyWoodWorkingPlans.com ScrollsawPlans.com SketchupPlans.com SketchUp 3D Warehouse ToolJigs.com WhirligigKits.com WoodchuckCanuck.com Woodworking-Patterns.com
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
×