It has a narrow and tapered blade, usually pointed at the end. A compass saw typically has about 8-10 teeth per inch, which can go up to 20 teeth per inch if you are cutting harder materials. A compass saw comes with a pistol grip, which is best suited if you are working in confined places. The pointed end helps you penetrate soft materials without requiring a pilot hole.
Frame saws (or “bow saws” or “turning saws”) use tension to tighten a blade between two saw arms. When used with a narrow blade, a frame saw works great for cutting curves (similar to a power bandsaw) and can also be used for rough cutting boards when a larger blade is added. Frame saws come in all sorts of sizes, with small teeth for fine work to large teeth for rough-cutting.

Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.


Hand saws are mostly used for rough cutting a board to an approximate size. Rip hand saws, in particular, rip along the length of the grain (“ripping”). Look for a rip hand saw between 4-7 ppi (“points per inch”, or “teeth per inch”).  The ppi will usually be marked on the blade (can you see the number 5 on the above saw blade?). A 4 ppi rip hand saw will remove more wood, but may be more difficult to cut.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
If you’re looking to show off you’re woodworking skills and you have a piece of wood with a beautiful linear grain pattern, then this box project is a great choice. It’s a more refined box design, and as you might expect, it’s a little more challenging to build than the simple keepsake box presented earlier on this gift list. The sides are constructed so that the wood grain flows smoothly across one face, around the corner and into the adjoining face — and all the way around the box without a break — the grain itself becomes a major part of the design. The design is also enhanced by tapering the box sides, allowing the eye to more easily take in the continuous run of grain at the corners.

I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.

Although all of these components in your new or remodeled home are built by carpenters who specialize in building things with wood, a general contractor typically oversees construction of the entire house. If the general contractor is also a carpenter skilled in all these areas, they may well construct your entire home. More often, the general contractor subcontracts out the various building stages to different individuals, including carpenters.

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Making the flowers grow in the planters allow them to carry these plants, herbs, and flowers to anywhere in the home or patio. You will find this project one of the profitable and inexpensive. And the good thing is that you don’t need to be proficient in woodworking to build this one, just by having/knowing the basics of woodworking will be enough to build this one. Place your planter anywhere in the house or garden.
Source tutorial includes all the details about every single step with images and diagrams. You will get to know everything deeply in the source tutorial. Although, this a professional woodworker’s project, but it doesn’t mean that you can’t do it. If I can do it, then you can do it too. You have to know some basic woodworking knowledge first and should have some basic skills of using woodworking tools.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
This list has some great beginner projects to spark your inspiration; from the simple to the more elaborate. Does building furniture interest you more than making boxes? We found some projects for you that are easy to follow along with and learn the basics that you need to move on to more challenging projects. We hope that this list inspires your next project!
An excellent introduction to woodworking is to use crates as your main material. The boxes are already formed, which means less assembly work for you—yet it looks impressive once your project is altogether. With this crate coffee table, you still get to practice your skills adding the casters and the center box. Finish with a little stain, and this table is ready to roll. You can find the full tutorial at DIY Vintage Chic.  

A hand saw is an indispensable hand tool that offers you a lot of cutting versatility. It can be used for all sorts of projects or tasks, like trimming tree limbs, cutting up hardwood lumber from a felled tree, building a house, cutting up floor boards for a home renovation, fine detailed joinery work, or cutting through PVC plastic pipes. Whatever type of cutting you you have to do, the hand saw can do it all.
Shorter hand saws (around 20-inches long) are officially called “panel saws” because they can fit in the panel of a large tool chest, and they are more suited for fine furniture making. Most normal hand saws run from 24-inches to 30-inches long. Many people mistakenly call all saws of this type “panel saws”. But don’t be rude and correct them! Try out different sizes to see what length you’re comfortable with.
Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
×