I think the number of teeth cooresponds to stock thickness. I like to have 6 teeth in the kerf. So working with 4/4 stock mostly, I like a 4 tpi rip saw. I don’t do a lot of "rough" cross-cuts. I tend to plane first and x-cut later and often for the last time. So my x-cut saw is about 12tpi. For basic stock prep I only use a few saws- my 4 tpi rip saw, my 20" x-cut panel saw, and a fine rip saw for thin stock. For narrow stock and precision cuts I use a 14" x-cut backsaw, 12-14tpi.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
The worst part of the job for me is dealing with legal matters and paperwork. There may not be a lot, and hiring an accountant and lawyer removes much of the burden, but it still seems like I’m filling out a form or making a phone call at least once a week to deal with red-tape. Even something as simple as setting up to buy from a new supplier can require filling out and submitting a tax document. We did have to spend a half hour unloading a wood delivery in freezing rain once, which was a terrible experience, but still not as bad as the constant need to fill IRS forms.
There are many other great tutorials you can find on the internet, but they all need many tools to build. You might not have a table saw, a router, or miter saw and of course, it costs hundreds of dollars. And you can sell this Deck cooler at almost no cost and make a handsome profit. By having a drill and impact driver plus any type of saw, you can build it easily.

Have you considered picking up woodworking? No? Now might be the time to consider it! There are so many things that you can make for a fraction of the price you can buy them for, not to mention you can customize everything you make. Woodwork projects also make great gifts and you can tell everyone that you made it by hand! What is better than that?


A dozuki saw has a thin, flexible blade, with fine teeth and a straight handle, which makes it well-suited to flush-cutting pegs. The flexible tip helps it get close to the base of a pin, and the straight handle is easier to hold and control with the saw on its side than a pistol grip would be. Get a crosscut dozuki with about 20 tpi. So why not just use a flush-cut saw? Their teeth have no set, so they clog and don’t cut as well. Dozukis don’t have those problems. The thin blade can kink, so get a saw with a replaceable blade.
Throughout the years I’ve read accounts of people who “discovered” hand planes and had it change their lives. “I was a cabinetmaker for 30 years” they write, “then I” read this article or took this class “and I sharpened my plane iron and now I know what I was missing for all those years”. As I write this I know many of you are nodding in agreement. I know that happened to you too. It happened to me too. 

One simple method of getting your foot in the door is to check out Craigslist help-wanted ads. It’s about the only place I’ve seen a decent selection of job postings for woodworking, and some are entry-level positions. Once a little experience with basic tools is acquired, more options open up. However, a lot of the most interesting positions can’t be found by searching jobs postings. Many high-end furniture shops recruit via networking instead of advertising for help. To break into the custom furnishings market, do research to find out who is doing the sort of work you’d like to get into, then figure out what circles they participate in. If they belong to a particular artist association, try to attend their shows or get an introduction to one of the members. If they teach classes, attend their classes. The goal is to get their attention, and let it be known you wish to pursue a woodworking career. Demonstrate good work ethic, reliability and a willingness to learn, and someone might take notice. Talk to people and continue to introduce yourself to others.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.
I think the number of teeth cooresponds to stock thickness. I like to have 6 teeth in the kerf. So working with 4/4 stock mostly, I like a 4 tpi rip saw. I don’t do a lot of "rough" cross-cuts. I tend to plane first and x-cut later and often for the last time. So my x-cut saw is about 12tpi. For basic stock prep I only use a few saws- my 4 tpi rip saw, my 20" x-cut panel saw, and a fine rip saw for thin stock. For narrow stock and precision cuts I use a 14" x-cut backsaw, 12-14tpi.
This cat tree pallet house project could help you to build something durable with excellent living conditions for your cat. This cat tree house is unique and hand crafted. This could also satisfy the cat’s needs and wishes. This will give your cat a room play, jump, explore and also a comfortable sleep. This cat house looks very attractive and perfectly matched with trees. This is not only a cat house but can also be a piece of décor in your home. The trees used are natural, that is why this piece of pallets is for indoor only. You can find the further information and details about this cool cat tree house in the source tutorial.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
This group primarily works on custom projects because they love taking on a challenge. They truly took pride in their work and the honing of their craft.  We watched them work diligently on our projects (and others) and couldn’t believe the attention to detail they employed as they carefully made beautiful products out of single pieces of raw wood. It shows through on every beautifully simple design we worked with them to bring to life. 
While some people consider the circular saw to be more of a carpentry tool than a fine woodworking tool, but some would disagree. There may be no more versatile basic handheld power tool than a circular saw. When used with a clamp-on straight-edge, the circular saw can be just about as accurate as a table saw and handle quite a few of the tasks that one would attempt with a table saw, particularly cutting sheet goods such as plywood or medium-density fiberboard. When woodworking on a budget, a quality circular saw should be the first handheld power tool purchased, as it is the one that will likely be the most useful as you get started.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
In order to be successful in woodworking, there are skills absolutely necessary to know and master.  Many of these skills were once taught in high school’s all across the nation, but today, most woodshop classes have been suspended, and people must learn through college classes, apprenticeships, internships, from professionals, or by trial and error. 
It has a narrow and tapered blade, usually pointed at the end. A compass saw typically has about 8-10 teeth per inch, which can go up to 20 teeth per inch if you are cutting harder materials. A compass saw comes with a pistol grip, which is best suited if you are working in confined places. The pointed end helps you penetrate soft materials without requiring a pilot hole.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of

Silky offers the ultimate professional woodworking and carpentry saws for both the professional and hobbyist. Laser-cut, impulse hardened blades for exceptional performance and incredibly long service life are the hallmark of all Silky woodworking saws. All Silky woodworking saws use unique alloy steel engineered and produced exclusively for Silky Saws.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
×