Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!

I think the number of teeth cooresponds to stock thickness. I like to have 6 teeth in the kerf. So working with 4/4 stock mostly, I like a 4 tpi rip saw. I don’t do a lot of "rough" cross-cuts. I tend to plane first and x-cut later and often for the last time. So my x-cut saw is about 12tpi. For basic stock prep I only use a few saws- my 4 tpi rip saw, my 20" x-cut panel saw, and a fine rip saw for thin stock. For narrow stock and precision cuts I use a 14" x-cut backsaw, 12-14tpi.
Aside from modern heirloom saws (like Lie-Nielsen & other high-end custom saw makers) I would stay away from any cheap hand saws manufactured after World War II. Yes, this is the same advice that I gave with hand planes. Tool quality really declined after WWII. What brands should you look for? Historically there were a lot of hand saw makers, because saws are easier to manufacture than hand planes. Here are some of the old and new quality saw makers (in alphabetical order). The blue links lead to eBay and other searches for those hand saw brands so you can compare different models (some of the antique brands are not always available on eBay, so keep checking back):
Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.
Fir, also known as Douglas Fir, is very inexpensive and common at local home centers. It has a characteristic straight, pronounced grain with a red-brown tint. However, its grain pattern is relatively plain and it does not stain well, so Fir is commonly used when the finished product will be painted. While commonly used for building, this softwood would also be suitable for furniture-making as well.[12]
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
An excellent introduction to woodworking is to use crates as your main material. The boxes are already formed, which means less assembly work for you—yet it looks impressive once your project is altogether. With this crate coffee table, you still get to practice your skills adding the casters and the center box. Finish with a little stain, and this table is ready to roll. You can find the full tutorial at DIY Vintage Chic. 
Using these floating shelves in your room or kitchen is a great way to arrange and de-clutter space… I know, such groundbreaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
I confess that I went a little crazy and treated myself to a scroll saw and a lathe, so I am hoping to have many more woodworking projects in the near future. Eeeeek, I can’t wait. By clicking on either the photo or the link you will be directed to each DIY woodworking project. Click over to get free woodworking plans and instructions on how to complete each project. Please PIN the main post, or from each source post and not individual images in this post.
With the right tools and materials, what you build is only limited by your imagination and creativity. So why not have a little fun with the kids and teach them something at the same time? Our woodworker tools and woodworking supplies will help you put together an easy birdhouse, squirrel feeder or butterfly house. The kids will love to use our paint samples to add their creative touch, and will enjoy displaying the finished product in the backyard.
This creative picture frame project will blow your mind and you will start loving it. It’s obviously a cool wooden upcycling idea for DIY decorating at no cost. I just love the vintage look of these picture frames and think you will, too. Especially, when you will get to know how easy is it to build these picture frames at no cost. These wooden frames can make you a handsome profit when you went to sell them.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
It is one of the easiest woodwork projects we are going to discuss today. Although it looks very easy to make, I still could not find any good tutorial on the internet that explains how to build this one. So I am here sharing an article link that gets the closest. The article explains how to make different kinds of DIY candle holders and what items you may need for the project.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.
My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet. 

Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need. The saw's extra sharp teeth can cut and rip through all types of wood, and its uniquely designed handle gives you that extra operator control, and as it can cut with the speed of a coarse-cutting saw as well as providing a quality fine finish, this superbly designed hand saw comes at a very affordable price, which makes it a must-have hand saw for your tool box.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
Apprenticeships or internships are definitely a viable path. They can be the fastest way to learn due to all the hands-on experience, and some will even provide a small income. Those opportunities can be hard to find for those not already familiar with the woodworking scene. Supporting skills such as accounting, business, marketing, photography and website administration can be learned formally via conventional education such as college, but it’s tough to dedicate time and money in that route while also trying to master woodworking. Books and the internet are handy in this regard, and I did learn to setup WordPress websites by utilizing a basic Lynda.com subscription.

Frame saws (or “bow saws” or “turning saws”) use tension to tighten a blade between two saw arms. When used with a narrow blade, a frame saw works great for cutting curves (similar to a power bandsaw) and can also be used for rough cutting boards when a larger blade is added. Frame saws come in all sorts of sizes, with small teeth for fine work to large teeth for rough-cutting.
These 25 projects are absolutely stunning, to say the least. I would love to try out some of these designs all by myself and get started with some serious woodworking that I have been procrastinating for a long time. My favorites among these 25 are definitely the desk organizer, the bowling lane, and the tiered planter, but nevertheless, all are good in their own ways. I believe these projects only require hand tools and basic power tools like a rudimentary router and a jigsaw.
×