Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.

In our bedrooms, one furniture piece, often looked amazing and elegant, which always stands by our side, and always ready to store our favorite books, and other tiny things, and a super elegant piece that cannot be replaced at any cost: our nightstand, a simply amazing section. The nightstand can be easy and cheap to create with some wood pallets. In this DIY project, we are presenting you an idea to build a nightstand with having some pallets.


Hand saw blades are usually sharpened to two different tooth configurations, “Rip” and “Cross Cut”. You can change any saw’s tooth shape with saw sharpening tools.  There is also a hybrid hand saw tooth configuration that is in between a Rip and Cross-cut shape, called a “Sash” tooth configuration, which is useful if you can only afford one hand saw…but it’s not as proficient at either ripping or cross-cutting). Here are some tooth shape diagrams:
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
In being self-employed, one day will greatly vary from the next, but generally, I start in the morning by dealing with in-town errands or head right to the shop if there are none. Once at the shop, there’s an e-mail check, then a brief glance at various websites to look for new developments related to our market and clientele. Then the real workday starts. I’ve got a bunch of notes regarding current projects taped next to my computer and will make a list for the day’s tasks by picking the highest priority items from the notes. The goal is to get that stuff accomplished by the end of the day. There are two of us in the shop, but we usually work on separate projects, so that’s why I have my own to-do list. Some days are spent on the computer designing or creating programs for the laser or CNC. Other times we’re doing runs of sunglasses or guitar parts which we sell wholesale to other businesses. In which case, I may be operating the laser or CNC. Despite the high-tech tooling, there’s still a lot of bench work to do, and that can involve cutting and fitting joints with chisels and hand planes. Besides that, there’s always plenty of rough lumber to mill since no project can begin until boards are flattened, surfaced and cut to dimension.
Hand saws are mostly used for rough cutting a board to an approximate size. Rip hand saws, in particular, rip along the length of the grain (“ripping”). Look for a rip hand saw between 4-7 ppi (“points per inch”, or “teeth per inch”).  The ppi will usually be marked on the blade (can you see the number 5 on the above saw blade?). A 4 ppi rip hand saw will remove more wood, but may be more difficult to cut.
This can be an elegant centerpiece of your patio furniture or room furniture. Building this project does not need any professional skills, but anyone with basic woodworking knowledge and skills can build this project easily. This project will take three or four hours of your time to build, or can be a day if you take some breaks during the work as I did.
A hand saw comprises of two parts, the blade, and the handle. The blade will usually be made out of high carbon steel, and the handle will either be made out of thick plastic like the Vaughan or the IRWIN Tools Universal hand saw, or exquisitely hand-crafted beechwood like Crown Tools hand saw. The secret to a hand saw's cutting success lies in its jagged edge or teeth. The teeth are measured by inch and most sizes range from 9 teeth-per-inch to 17 or 20 teeth-per-inch.
Who doesn’t want to have one awesome and handy wooden desk organizer that not only looks beautiful but can store all your mini office desk items properly? See the picture below. I am sure you will love this one. I have already built one myself as I just could not resist having one at my office. This thing easily stores all my office desk essentials, including pen, pencils, marker, small notebooks, etc. in the most organized way. You can see it yourself.
For an artisanal look, you can use woodworking hand tools. These are easy to use, lightweight and require no batteries or power cords to operate. Many hand tools are covered by multi-year or even lifetime warranties for extra protection and value. Set up your pieces with the most expertly crafted woodworking hardware, such as hinges, pulls and knobs to create a final product that you can give as a gift, sell or just display proudly.
×