All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
I think the number of teeth cooresponds to stock thickness. I like to have 6 teeth in the kerf. So working with 4/4 stock mostly, I like a 4 tpi rip saw. I don’t do a lot of "rough" cross-cuts. I tend to plane first and x-cut later and often for the last time. So my x-cut saw is about 12tpi. For basic stock prep I only use a few saws- my 4 tpi rip saw, my 20" x-cut panel saw, and a fine rip saw for thin stock. For narrow stock and precision cuts I use a 14" x-cut backsaw, 12-14tpi.

When you’re making furniture, there are always small parts-like moldings, pulls, drawer stops, and pegs-that need to be cut to length. Instead of using a tablesaw, which could destroy those delicate parts in a flash, I use a Western-style carcass backsaw. A crosscut saw with about 12 to 14 tpi and a blade that’s a bit taller and longer than on a dovetail saw can easily make clean, accurate cuts in parts up to 1 in. thick and 3 in. to 4 in. wide. To increase accuracy, I use the saw with a sawhook, which is simply a flat board with a square fence (and a cleat that goes in your vise). The hook is great because it gives you a way to hold the workpiece still during the cut (both you and the saw press it against the fence) and helps to keep the saw cutting straight and square.
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.

"I was considering making an offer on a house that was built in 1953, definitely a fixer-upper! Since I am a 70-year-old single woman, I needed to be sure the project would be feasible for me. Jim has impressive experience in many areas of construction, but took the time to analyze the home with my needs and skills in mind, since he had seen my previous projects. He has helped me with various aspects of the remodel, and I would highly recommend him for his abilities, integrity, work ethic, and reasonable pricing."
The number of saw teeth per inch (or points per inch) is another important factor in selecting a hand saw for a particular purpose. Large hand saw teeth will cut quickly through the wood, but will leave a rough surface. Small hand saw teeth will cut finely and accurately, but are not practical for cutting long lengths or widths. When dealing with normal hand saws or frame saws, “Rip” teeth are typically larger than “Cross Cut” teeth. In back saws, rip and cross-cut teeth can vary in size. The number of teeth per inch are usually expressed as “points per inch” (ppi) or “teeth per inch” (tpi) and the number is usually stamped into the saw plate. However, you can change the tooth count during your sharpening. Here are examples of large (rough) and small (fine) hand saw teeth:

As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial. 

Hand saws are mostly used for rough cutting a board to an approximate size. Rip hand saws, in particular, rip along the length of the grain (“ripping”). Look for a rip hand saw between 4-7 ppi (“points per inch”, or “teeth per inch”).  The ppi will usually be marked on the blade (can you see the number 5 on the above saw blade?). A 4 ppi rip hand saw will remove more wood, but may be more difficult to cut.

This is not exactly a tutorial, but a guide to some really cool woodworking projects. Although we are not teaching you to make anything, we are always here to help. Feel free to ask your queries in the comments in case if you face any issue while working on any of these projects. Also, tell us how much you liked this article. Did you enjoy reading it? Did you work on any of these projects, and if yes, how was your experience? You are also welcome to share any images of your completed woodwork projects.
I regularly use four handsaws in my shop, not because I’m a hand-tool nut but because a handsaw is often the smartest, most efficient choice for the job at hand. Take the job of crosscutting or mitering delicate moldings and miter keys. you could do those tasks at the tablesaw or miter saw, but you’d need to devise a jig to hold the workpiece during the cut, and there’s no guarantee that the spinning blade won’t chew up the workpiece. It’s much quicker, safer, and cleaner to make the cut with a backsaw. 

We are including a source tutorial for this project in the link below. This tutorial includes detailed instructions of step by step process of this project. Ana white presents this DIY tutorial. You should read the tutorial carefully first before starting work on this project. You can see some diagrams and photos in the tutorial which helps you to understand the steps easily. 

Re-sawing is the method for making two thinner pieces out of one board. Say you need two pieces of wood 3/8” thick, but only have a 1” thick board, you can slice the wood into to thinner pieces by cutting down the middle, making the two pieces. This is not the same as ripping, as you’re not cutting down the width of the board, but through the thickness instead.

And then there are jobs that a power tool simply couldn’t (or shouldn’t) do, like cutting pegs flush. The only power-tool option is a router, and you have to make an auxiliary base to raise the router and then dial in the bit’s cut depth so that it doesn’t ruin the surface. not to mention that pegs are often used on narrow parts, like legs, where the router can tip and ruin the part.


There are many other great tutorials you can find on the internet, but they all need many tools to build. You might not have a table saw, a router, or miter saw and of course, it costs hundreds of dollars. And you can sell this Deck cooler at almost no cost and make a handsome profit. By having a drill and impact driver plus any type of saw, you can build it easily.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a Pallet dining table. So, I searched for a plan design idea and build a very own beautiful pallet dining table. I was an amazing DIY plan, I just love it!
What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
ANeelyHall.com CLCraft.com ClockPatterns.com ClockProjects.com DownloadWoodworkingPlans.com DollPlans.com FreeWoodworkingPlan.com FreeWoodworkingPlans.info iCraftPatterns.com JigSawPlans.com LandscapeTimberPlans.com PDFWoodworkingPlans.com PlyWoodWorkers.com PlyWoodWorking.com PlyWoodWorkingPlans.com ScrollsawPlans.com SketchupPlans.com SketchUp 3D Warehouse ToolJigs.com WhirligigKits.com WoodchuckCanuck.com Woodworking-Patterns.com
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood. 

Cedars are strong, aromatic softwoods that are capable of enduring outdoor elements, the most common of which is the Western Red Cedar. Western Red Cedar can sustain wet environments without succumbing to rot, and as a result is commonly used for outdoor projects such as patios, outdoor furniture, and building exteriors. This wood can be easily found at most home centers for a moderate price.[12]
Attention: Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Reality Daydream has made every effort to be complete and accurate in the instructions of the plans on this website. Reality Daydream will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
They both are both nice, but neither cut quite as well as the “progressive pitch” Lie-Nielsen dovetail saw that I’d tried at one of my traditional woodworking classes. The Lie-Nielsen dovetail back saw had the perfect thickness and such a comfortable pistol grip. I finally realized that I had spent more money on two dovetail saws that didn’t quite satisfy me than I had on a perfect new Lie-Nielsen dovetail saw ($125). So I ordered this dovetail saw from Lie-Nielsen, and have loved it for many years (even after buying many more dovetail saws)!
Hand saw blades are usually sharpened to two different tooth configurations, “Rip” and “Cross Cut”. You can change any saw’s tooth shape with saw sharpening tools.  There is also a hybrid hand saw tooth configuration that is in between a Rip and Cross-cut shape, called a “Sash” tooth configuration, which is useful if you can only afford one hand saw…but it’s not as proficient at either ripping or cross-cutting). Here are some tooth shape diagrams:
In case, if you are not comfortable with building these two designs of tree shelves, you can browse some more wooden shelves on the internet. But we are also including a link to different designs of wooden shelves that you can build easily, find the one in the link below. Be sure that you have selected the project which matches your woodworking skills.

Some people prefer to watch video tutorial instead of having a source tutorial. For them, we are including a YouTube video tutorial for building a Pallet Christmas tree. Although, the Christmas tree DIY in the video tutorial is little different from the one in the source tutorial and the one shown in the image above. But it will also help you to build a new Christmas tree using some pallets.
Commonly used woodworking tools included axes, adzes, chisels, pull saws, and bow drills. Mortise and tenon joints are attested from the earliest Predynastic period. These joints were strengthened using pegs, dowels and leather or cord lashings. Animal glue came to be used only in the New Kingdom period.[3] Ancient Egyptians invented the art of veneering and used varnishes for finishing, though the composition of these varnishes is unknown. Although different native acacias were used, as was the wood from the local sycamore and tamarisk trees, deforestation in the Nile valley resulted in the need for the importation of wood, notably cedar, but also Aleppo pine, boxwood and oak, starting from the Second Dynasty.[4]
It has a narrow and tapered blade, usually pointed at the end. A compass saw typically has about 8-10 teeth per inch, which can go up to 20 teeth per inch if you are cutting harder materials. A compass saw comes with a pistol grip, which is best suited if you are working in confined places. The pointed end helps you penetrate soft materials without requiring a pilot hole.
For an artisanal look, you can use woodworking hand tools. These are easy to use, lightweight and require no batteries or power cords to operate. Many hand tools are covered by multi-year or even lifetime warranties for extra protection and value. Set up your pieces with the most expertly crafted woodworking hardware, such as hinges, pulls and knobs to create a final product that you can give as a gift, sell or just display proudly.
Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.
With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
×