Bethany Sy is the creative free-spirit behind DIY/Lifestyle blog, Reality Daydream. She and her husband have been making their 117-year-old homestead their own, and love sharing tips and tutorials along the way. When they found themselves in the trenches of infertility, they started a journey that would prove to be their most important DIY project ever, and have 3 beautiful girls to show for it.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The moment we first saw this group’s master lather begin his work, we knew we’d found someone special. He’s a quiet, steady-handed worker. He smiles and lets his group’s work speak for itself. And it does. We watched in awe as he chipped away angled pieces of wood from a solid block of thick Mugavu – all done “Michelangelo-style” right in front of our eyes.
IAM Mobile 4.0 offers more features and functions to read and share information about our union and the important issues we face as working families. This app combines all of the IAM's popular online functions such as the IAM Journal, the Machinists News Network on demand video service, the IAM webpage GOiam.org, iMail, an IAM Photo Gallery, the IAM Facebook Page, and lots more -- all in one easy-to-access App for tablets and smartphones.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
"Cody did such a incredible job! He not only gave me my dream kitchen, but he was also so personable, professional, and kind. While he was here I also had some other things that needed fixed around the house and he was happy to help with. A master of all trades. 10/10 have recommended to all my friends and will have him do future things to our home when needed."
Bandsaws provide a unique capability to create large scale, curvaceous compound cuts. Just think of the capabilities that this provides for projects such as a cabriole leg, duck decoy, spatula, etc. The possibilities for three dimensional shaping are virtually endless with a bandsaw! This cool process can actually be performed using two dimensional patterns that
Everyone wants to add some decorative stuff to their furniture in the home or patio. These elegant pumpkin décor pieces can be a nice add to their décor, You can build these pieces in less than a day or more than it in case if you are not that skilled. You don’t need to be a professional woodworker to build this one, rather, if you have control on some of the basics of woodworking than it’s not a difficult task to build for you.
While many woods can be used for carving, there are some clear favorites, including Aspen, Basswood, Butternut, Black Walnut, and Oak. Because it has almost no grain and is notably soft, Basswood is particularly popular with beginner carvers. It is used in many lower-cost instruments like guitars and electric basses. Aspen is similarly soft, although slightly harder, and readily available and inexpensive. Butternut has a deeper hue than Basswood and Aspen and has a nice grain that is easy to carve, and thus friendly for beginners. It's also suitable for furniture. While more expensive that Basswood, Aspen, and Butternut, Black Walnut is a popular choice for its rich color and grain. Lastly, Oak is a strong, sturdy, and versatile wood for carving with a defined grain. It's also a popular wood for furniture making.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.
Another important factor to be considered is the durability of the wood, especially in regards to moisture. If the finished project will be exposed to moisture (e.g. outdoor projects) or high humidity or condensation (e.g. in kitchens or bathrooms), then the wood needs to be especially durable in order to prevent rot. Because of their oily qualities, many tropical hardwoods such as teak and mahogany are popular for such applications.
Maybe, there is nothing ever better than enjoying a summer evening while lounging on a comfortable patio sofa. It may be costly to get that patio sofa, but hand-made furniture is anything but cheap. You don’t need a long list of materials and tools to complete some projects. You can build your own sofa in a day or maybe a day and a half. You can use some pallets in this project.
With its thin blade and tall frame, the coping saw is adept at cutting curves. It was used in the past to cope molding to get perfect miters. But I use it when cutting dovetails. I was taught to chop out all of the waste with a chisel-a tedious job. When I tried sawing out the waste with a coping saw, it was a watershed moment for me and I’ll never go back. You don’t need a superexpensive frame, but don’t go with a hardware store cheapy, either. I spent about $20 on mine and it’s easy to tighten and adjust the blade. The handle is comfortable, too. As for blades, get ones with a fine cut. They cut slower, which means the saw is less likely to jump the kerf at the end of the cut and damage the tail or pin.
But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Of course, there’s the occasional install, client meeting or photo-shoot, but those don’t happen often enough to be considered a typical day. I should mention that every day brings its share of phone conversations with clients and suppliers. That happens at all hours. Most work days end by 7:30pm, and once I’m home and have eaten supper, I’ll usually put another hour into handling whatever financial, legal or internet tasks are most pressing at the time. Altogether, a typical work day is about 12 hours, and this is 6 days a week. At 2 1/2 years old, the business is still a start-up which is the reason such long hours are necessary.
Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.
The last tool I recommend for every beginning woodworker is a quality router. While many routers available today offer two different bases (a stationary base and a plunge router base), for most beginners, a quality stationary base model will take care of quite a number of tasks, and can also be mounted in a router table should you choose to invest in (or even build one) one down the line. Choose a router model that is at least 2-HP and has electronic variable speed controls (as larger cutting bits should use slower speeds), a soft start mechanism and is easy to make bit changes (preferably with the ability to use both 1/2-inch and 1/4-inch shank router bits).
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
The number of saw teeth per inch (or points per inch) is another important factor in selecting a hand saw for a particular purpose. Large hand saw teeth will cut quickly through the wood, but will leave a rough surface. Small hand saw teeth will cut finely and accurately, but are not practical for cutting long lengths or widths. When dealing with normal hand saws or frame saws, “Rip” teeth are typically larger than “Cross Cut” teeth. In back saws, rip and cross-cut teeth can vary in size. The number of teeth per inch are usually expressed as “points per inch” (ppi) or “teeth per inch” (tpi) and the number is usually stamped into the saw plate. However, you can change the tooth count during your sharpening. Here are examples of large (rough) and small (fine) hand saw teeth:
Woodcraft is quite possibly one of the best forms of expressing the artist in. It looks so simple yet so intricate. It helps you reconnect with nature on a spiritual level. It is dangerously addictive as people who pursue this hobby have been known to spend hours at a time working on a simple project by using various woodworking tools and never quite know it.
A clean well-organized environment is key to staying A clean well-organized environment is key to staying happy. The same goes for your desk. Keep the clutter at bay and organize all of your small essentials with the Dickies Work Gear 57050 Mug Organizer. Designed to fit over most mugs this clever caddy features 8 outer pockets and 6 ... More + Product Details Close
Softwood is most commonly found in the regions of the world with lower temperatures and is typically less durable, lighter in weight, and more vulnerable to pests and fungal attacks in comparison to hardwoods. They typically have a paler color and a more open grain than hardwoods, which contributes to the tendency of felled softwood to shrink and swell as it dries. Softwoods usually have a lower density, around 25-37lb/cu ft, which can compromise its strength. Density, however, does vary within both softwoods and hardwoods depending on the wood's geographical origin and growth rate. However, the lower density of softwoods also allows it to have a greater strength with lighter weight. In the United States, softwoods are typically cheaper and more readily available and accessible. Most softwoods are suitable for general construction, especially framing, trim, and finish work, and carcassing.
And finally, we ended up with an original, elegant, functional and an inexpensive bar that we were able to make ourselves. Even though this shelf project was created as a simple way of adding some useful decorative pieces. Check out our this DIY beautiful piece which is made of reclaimed pallets. It doesn’t involve any scrap, but it is still the project that will look elegant in your room.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many