The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
The saw's blade is precision set and has extra sharpened teeth and it has a good amount of flexibility to give you that much-needed cutting control for all sorts of cross grain cuts. For indoor and outdoor use, the GreatNeck has a weather-resistant dark stained hardwood handle and it is very comfortable to hold. The GreatNeck hand saw is covered by a lifetime warranty.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.

Over the years, the editors at The Family Handyman have built nearly a hundred bookcases. From all that experience, we’ve learned that the best building tricks are shortcuts that avoid complex steps. So whether you’re a beginning builder or a veteran, these bookcase and shelf building tips will lead to beautiful results with less time and effort. Get the bookcase and shelf tips.
Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Woodworking power tools include various saws for cutting the wood to size and drills for creating holes. Sand pieces down to the finish you want before you sand with portable sanders. Use drivers to install woodworking fasteners for a durable final piece. Cleverly designed rotary tools feature removable bits that can drill, drive, sand, cut and more, so you can use a single tool to accomplish virtually every task of your project. For a production-level project, nail guns can save you hours or even days depending on the work involved.

There are two types of electric circular saws, the worm drive and the sidewinder. The worm drive saw has enough torque to cut through wet lumber and concrete. The behind-the-blade handle placement reduces kickback, and the blade’s left-side position makes it easy to see your cut line if you’re right-handed. The sidewinder’s motor, attached directly to the blade, weighs less but also has less torque.
Some tools that are required for this project are a hammer, chisels, sanding sponges, tack cloth, stain brushes and face mask, etc. You can make one of these end tables and put in your bedroom. You can also take some different ideas to build a pallet end table from the internet, we are also providing a link, select the one design from the link and start building your very own tree side stump table.
This creative picture frame project will blow your mind and you will start loving it. It’s obviously a cool wooden upcycling idea for DIY decorating at no cost. I just love the vintage look of these picture frames and think you will, too. Especially, when you will get to know how easy is it to build these picture frames at no cost. These wooden frames can make you a handsome profit when you went to sell them.
A hand saw comprises of two parts, the blade, and the handle. The blade will usually be made out of high carbon steel, and the handle will either be made out of thick plastic like the Vaughan or the IRWIN Tools Universal hand saw, or exquisitely hand-crafted beechwood like Crown Tools hand saw. The secret to a hand saw's cutting success lies in its jagged edge or teeth. The teeth are measured by inch and most sizes range from 9 teeth-per-inch to 17 or 20 teeth-per-inch.

Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.
Hanging planters are a big hit nowadays so don't let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother's Day gift for your loved one.

Fir, also known as Douglas Fir, is very inexpensive and common at local home centers. It has a characteristic straight, pronounced grain with a red-brown tint. However, its grain pattern is relatively plain and it does not stain well, so Fir is commonly used when the finished product will be painted. While commonly used for building, this softwood would also be suitable for furniture-making as well.[12]


Craft and fine artists use a variety of materials and techniques to create art for sale and exhibition. Craft artists create handmade objects, such as pottery, glassware, textiles, and other objects that are designed to be functional. Fine artists, including painters, sculptors, and illustrators, create original works of art for their aesthetic value, rather than for a functional one.
Hardwoods are separated into two categories, temperate and tropical hardwoods, depending on their origin. Temperate hardwoods are found in the regions between the tropics and poles, and are of particular interest to wood workers for their cost-effective aesthetic appeal and sustainable sources.[9] Tropical hardwoods are found within the equatorial belt, including Africa, Asia, and South America. Hardwoods flaunt a higher density, around 65lb/cu ft as a result of slower growing rates and is more stable when drying.[9] As a result of its high density, hardwoods are typically heavier than softwoods but can also be more brittle.[9] While there are an abundant number of hardwood species, only 200 are common enough and pliable enough to be used for woodworking.[11] Hardwoods have a wide variety of properties, making it easy to find a hardwood to suit nearly any purpose, but they are especially suitable for outdoor use due to their strength and resilience to rot and decay.[9] The coloring of hardwoods ranges from light to very dark, making it especially versatile for aesthetic purposes. However, because hardwoods are more closely grained, they are typically harder to work than softwoods. They are also harder to acquire in the United States and, as a result, are more expensive.[9]
Any serious woodworker knows that square and flat Any serious woodworker knows that square and flat stock is the key to producing fine work so it’s time to skip the hand tools and graduate to the JJ-6HHDX 6 in. long bed jointer. This beast boasts a helical insert cutter head with staggered carbide inserts yet runs quietly and ...  More + Product Details Close
With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
I confess that I went a little crazy and treated myself to a scroll saw and a lathe, so I am hoping to have many more woodworking projects in the near future. Eeeeek, I can’t wait. By clicking on either the photo or the link you will be directed to each DIY woodworking project. Click over to get free woodworking plans and instructions on how to complete each project. Please PIN the main post, or from each source post and not individual images in this post.
Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.
The number of saw teeth per inch (or points per inch) is another important factor in selecting a hand saw for a particular purpose. Large hand saw teeth will cut quickly through the wood, but will leave a rough surface. Small hand saw teeth will cut finely and accurately, but are not practical for cutting long lengths or widths. When dealing with normal hand saws or frame saws, “Rip” teeth are typically larger than “Cross Cut” teeth. In back saws, rip and cross-cut teeth can vary in size. The number of teeth per inch are usually expressed as “points per inch” (ppi) or “teeth per inch” (tpi) and the number is usually stamped into the saw plate. However, you can change the tooth count during your sharpening. Here are examples of large (rough) and small (fine) hand saw teeth:
I believe there are demos on the use of the Dozuki on a number of sites, but you would, do best watching some from Japan. Also, I think the sites of Japanese Woodworkers Tools and Lee Valley Tools might have some information or you could search "using dozuki saws" or using Japanese saws". If I can locate a good site I'll post it here--Good luck, Mainewood 

Hardwoods are separated into two categories, temperate and tropical hardwoods, depending on their origin. Temperate hardwoods are found in the regions between the tropics and poles, and are of particular interest to wood workers for their cost-effective aesthetic appeal and sustainable sources.[9] Tropical hardwoods are found within the equatorial belt, including Africa, Asia, and South America. Hardwoods flaunt a higher density, around 65lb/cu ft as a result of slower growing rates and is more stable when drying.[9] As a result of its high density, hardwoods are typically heavier than softwoods but can also be more brittle.[9] While there are an abundant number of hardwood species, only 200 are common enough and pliable enough to be used for woodworking.[11] Hardwoods have a wide variety of properties, making it easy to find a hardwood to suit nearly any purpose, but they are especially suitable for outdoor use due to their strength and resilience to rot and decay.[9] The coloring of hardwoods ranges from light to very dark, making it especially versatile for aesthetic purposes. However, because hardwoods are more closely grained, they are typically harder to work than softwoods. They are also harder to acquire in the United States and, as a result, are more expensive.[9]

A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.

Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.
The hand saw has a greater TPI, 17 teeth-per-inch, which provides a clean and precise cut and the 1½- inch blade is made from hardened steel with extra brass backing which gives the blade that extra strength to cut through all types of wood, soft and hardwood, and gives it additional resistance to any wear or tear or corrosion, so you can be confident of high-quality results.
The amazing 15-inch hand saw has special ‘triple ground’ extra sharp teeth that can cut and rip through wood three times faster than other similar hand saws. The universal tooth grind is designed to remove material quickly, and its innovative design combines the speed of a coarse-cutting saw with the finish of a fine-cutting saw, so you can expect a clean and accurate cutting action.
Why would you buy a costly platform bed from Ikea or somewhere else when you can make one yourself at home? Oh yes, you can. A bed is the most common furniture piece used in the house and probably the costliest one. Wouldn’t it be great if you could just make a bed of your own, without having to spend many bucks for buying one? So I am here sharing a great tutorial to help you to build a nice comfy platform bed that you can use anywhere in the house.
This information is taken directly from the Occupational Outlook Handbook published by the US Bureau of Labor Statistics. Truity does not editorialize the information, including changing information that our readers believe is inaccurate, because we consider the BLS to be the authority on occupational information. However, if you would like to correct a typo or other technical error, you can reach us at help@truity.com.

Many beginners trying to get started in woodworking take one look at their budget and worry how they can afford to buy a whole shop full of power tools to get started. Fortunately, one doesn't have to spend a fortune to get started. There are really only seven woodworking tools that I would recommend any beginning woodworker have on hand from the start, and most are relatively inexpensive. However, with these seven tools, a beginner can tackle quite a number of projects.


Back saws have fine teeth and thin metal saw plates, and are used for making precision wood cuts. They have rigid brass or steel backs to keep the saw plate from bending, which provides rigidity for accurate cuts of wood joints. The smaller the saw teeth, the finer the cut. Historically, back saws were used primarily by joiners and cabinetmakers, and are typically more expensive than normal hand saws. 
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
I’m often asked, “what is the best hand saw?” It’s hard to narrow down all the many brands to one best hand saw, but I will recommend some quality new and antique saw brands. The great thing is that you can find great old hand saws for as low as $5. But before I discuss the urgent, semi-urgent, and non-urgent hand saws that you need, let’s talk about new and antique hand saw brand names / manufacturers (this will apply to all the types of hand saws below).

As for schooling, many local school districts, community colleges and woodworking stores offer woodworking classes, but those are a mixed bag. A handful is really good and many are terrible. There’s also a big difference between woodworking for fun and doing it for a living, and most classes are geared towards hobbyists. Out of all the proper woodworking schools with good reputations, I’ve only had personal experience with Marc Adams School of Woodworking. That place I recommend 100%, as the instructors are generally active professionals in their specialized niches, so one can always pick their brains for extra information related to earning a living. The director of the school also does a good job of screening instructors to eliminate the ones that don’t interact well in a classroom setting.


One simple method of getting your foot in the door is to check out Craigslist help-wanted ads. It’s about the only place I’ve seen a decent selection of job postings for woodworking, and some are entry-level positions. Once a little experience with basic tools is acquired, more options open up. However, a lot of the most interesting positions can’t be found by searching jobs postings. Many high-end furniture shops recruit via networking instead of advertising for help. To break into the custom furnishings market, do research to find out who is doing the sort of work you’d like to get into, then figure out what circles they participate in. If they belong to a particular artist association, try to attend their shows or get an introduction to one of the members. If they teach classes, attend their classes. The goal is to get their attention, and let it be known you wish to pursue a woodworking career. Demonstrate good work ethic, reliability and a willingness to learn, and someone might take notice. Talk to people and continue to introduce yourself to others.


Working with reclaimed wood is a savvy use of resources, and the material's country appeal is undeniable. With just a saw and a small drill, you can reuse old fencing to make these simple woodworking projects: picket-inspired picture frames. Finish them off by hot-gluing clothespins or bulldog clips to hang your prints. Here’s a step-by-step guide.
Despite the abundance of plastics, metals, and other materials, wood products continue to be an important part of our daily lives. Woodworkers make wood products from lumber and synthetic wood materials. Many of these products, including most furniture, kitchen cabinets, and musical instruments, are mass produced. Other products are custom made from architectural designs and drawings.
Although the term "woodworker" may evoke the image of a craftsman who uses hand tools to build ornate furniture, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work with great accuracy.

"Mike was referred to me by a family member. I enjoyed his attitude and attentiveness to what my ideas were for my basement. He did the framing in the basement and built two bedrooms and added the bathroom. He was a huge help in designing the area because I needed the bedrooms to be built where the egress windows are. He was always professional and responsive. I highly recommend Mike to anyone needing a carpenter for anything."
Although not required, becoming certified can demonstrate competence and professionalism. It also may help a candidate advance in the profession. The Architectural Woodwork Institute (AWI) offers a national certificate program, which adds a level of credibility to the work of woodworkers. The Woodwork Career Alliance of North America also offers five progressive credentials.
LuxuryHomeStuff.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, LuxuryHomeStuff.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
Following is everything you need to know about a career as a woodworker with lots of details. As a first step, take a look at some of the following jobs, which are real jobs with real employers. You will be able to see the very real job career requirements for employers who are actively hiring. The link will open in a new tab so that you can come back to this page to continue reading about the career:
The amazing 15-inch hand saw has special ‘triple ground’ extra sharp teeth that can cut and rip through wood three times faster than other similar hand saws. The universal tooth grind is designed to remove material quickly, and its innovative design combines the speed of a coarse-cutting saw with the finish of a fine-cutting saw, so you can expect a clean and accurate cutting action.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
Sometimes when I notice a pattern in the emails I receive and realize that many people are asking the same question, I decide to just go ahead and write a post about it! Because clearly, there’s a need for good and EASY beginner woodworking projects to help those of you that are ready to dip your toe into the amazing and creative world of woodworking.
As for schooling, many local school districts, community colleges and woodworking stores offer woodworking classes, but those are a mixed bag. A handful is really good and many are terrible. There’s also a big difference between woodworking for fun and doing it for a living, and most classes are geared towards hobbyists. Out of all the proper woodworking schools with good reputations, I’ve only had personal experience with Marc Adams School of Woodworking. That place I recommend 100%, as the instructors are generally active professionals in their specialized niches, so one can always pick their brains for extra information related to earning a living. The director of the school also does a good job of screening instructors to eliminate the ones that don’t interact well in a classroom setting.

Some of our readers prefer watching a video tutorial instead of heaving a written tutorial. For those readers, we are including a YouTube video tutorial for this project, Although, these are two a few different designs in both of the tutorials, but both of them help you in a better way to build two awesome wooden coat rack. You can find the video tutorial in the link below.
There are many different bed plans of various sizes you can find on different sites on the internet. Many of them can also be modified to make you able that you can get the exact look and size you want. Our first woodworking project is also about such a Bed plan that is elegant and you can also modify the plan if you want. A queen sized storage bed plan, which makes you able to build a big project of storage bed that can sell the most and make you some profit.
×