There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are twenty woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.

The last tool I recommend for every beginning woodworker is a quality router. While many routers available today offer two different bases (a stationary base and a plunge router base), for most beginners, a quality stationary base model will take care of quite a number of tasks, and can also be mounted in a router table should you choose to invest in (or even build one) one down the line. Choose a router model that is at least 2-HP and has electronic variable speed controls (as larger cutting bits should use slower speeds), a soft start mechanism and is easy to make bit changes (preferably with the ability to use both 1/2-inch and 1/4-inch shank router bits).

My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet.


Any serious woodworker knows that square and flat Any serious woodworker knows that square and flat stock is the key to producing fine work so it’s time to skip the hand tools and graduate to the JJ-6HHDX 6 in. long bed jointer. This beast boasts a helical insert cutter head with staggered carbide inserts yet runs quietly and ...  More + Product Details Close
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Re-sawing is the method for making two thinner pieces out of one board. Say you need two pieces of wood 3/8” thick, but only have a 1” thick board, you can slice the wood into to thinner pieces by cutting down the middle, making the two pieces. This is not the same as ripping, as you’re not cutting down the width of the board, but through the thickness instead.

Sharpening a saw is not hard. Type “saw sharpening” into your favorite web browser tonight, buy a couple files, and get to it. Here’s my trick: count your strokes. If the teeth are fairly uniform in their dullness (i.e. a tiny white snow cap, roughly the same size, appears on each, not every other tooth) just use one or two strokes per tooth. Do only the teeth set near you, then turn the saw around and do the other side.
I really like building difficult cabinets, laying them out, and assembling them. It really gives me a challenge to build something better each time, but the sanding and clean up are not my favorite aspects of this work; you better get used to it. And I wish I would have taken some business classes because the part of running a business is another element added to cabinet making.

Some of our readers prefer watching a video tutorial instead of heaving a written tutorial. For those readers, we are including a YouTube video tutorial for this project, Although, these are two a few different designs in both of the tutorials, but both of them help you in a better way to build two awesome wooden coat rack. You can find the video tutorial in the link below.
Though I’d not planned to strike out on my own, in 2012, it occurred to me I had gained the experience and skills needed to do so and financially, it appeared to be a good time to make it happen. Since I had experience in the field, I chose to remain in the church furniture market but focus more on traditional styles. I’d always admired the old, high altars in European churches and hoped to build some myself. Large scale work does require more than one person, and fortunately, I was able to recruit Austin Glidewell to help establish Altare Design, LLC. By this time I’d mastered conventional woodworking techniques and possessed a working knowledge of marketing, website-building, photography, 3D modeling and business tax laws.
When many people hear the word woodworker, the image of someone leaning over a workbench sanding a long piece of wood with his or her hands. However, modern woodworking requires training on highly technical machinery, such as CNC (computerized numerical control) machines.  Even woodworkers caught somewhere between modern equipment and a hand planer typically use CNC machines to fabricate large or intricate products.  If working for a large company, a lot of the work will be done on an assembly line or in various areas on the floor designated to complete a particular part of a project.   The tasks will be handled by different workers with very specialized training on each machine. For example, one machine might cut a large piece of wood into three sections, whereas another machine might take one of the sections and round each edge.
A good friend celebrated a milestone birthday this year, and since he’s a real wine afficionado, I wanted to give him a few very nice bottles of wine presented in a special way. I’ve seen expensive vintage wines sold in wooden presentation boxes, but I wanted to make something that’s well beyond the ordinary. So I designed a box that presents the wine bottles by “popping them up” as the lid is opened.
Following is everything you need to know about a career as a woodworker with lots of details. As a first step, take a look at some of the following jobs, which are real jobs with real employers. You will be able to see the very real job career requirements for employers who are actively hiring. The link will open in a new tab so that you can come back to this page to continue reading about the career:
A dozuki saw has a thin, flexible blade, with fine teeth and a straight handle, which makes it well-suited to flush-cutting pegs. The flexible tip helps it get close to the base of a pin, and the straight handle is easier to hold and control with the saw on its side than a pistol grip would be. Get a crosscut dozuki with about 20 tpi. So why not just use a flush-cut saw? Their teeth have no set, so they clog and don’t cut as well. Dozukis don’t have those problems. The thin blade can kink, so get a saw with a replaceable blade.
This is definitely going to be one of the easiest woodworking projects you’ll be reading about today. So why not just get started? The tutorial link is given below. Just do exactly what they are saying in the tutorial and you will end up making a beautiful wooden doormat just like the one in the image above. They are using pine wood to build this doormat. You can choose any wood material that best suits your budget.
Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.
I really like building difficult cabinets, laying them out, and assembling them. It really gives me a challenge to build something better each time, but the sanding and clean up are not my favorite aspects of this work; you better get used to it. And I wish I would have taken some business classes because the part of running a business is another element added to cabinet making.
Over the years, the editors at The Family Handyman have built nearly a hundred bookcases. From all that experience, we’ve learned that the best building tricks are shortcuts that avoid complex steps. So whether you’re a beginning builder or a veteran, these bookcase and shelf building tips will lead to beautiful results with less time and effort. Get the bookcase and shelf tips.
Finding and restoring antique hand saws can be extremely enjoyable, affordable, and fairly simple when compared to other woodworking hand tools (like hand planes). I love the satisfaction I get from restoring neglected antique saws. In this wood hand saw buying guide article I’ll talk about different hand saw types and the five specific hand saws that you’ll need to buy to get started in traditional woodworking: dovetail saw, carcass saw, tenon saw, rip hand saw, and cross-cut hand saw. I’ll also discuss other urgent, semi-urgent, and non-urgent hand saws for you to consider. Before jumping into the hand saw buyer’s guide, there are 3 hand saw characteristics that are important to understand: (1) Hand Saw Type, (2) Saw Tooth Shape, and (3) Saw Tooth Count. I’ll briefly summarize these hand saw characteristics below, and I’ve also included (4) Parts of a Hand Saw :

Sometimes called “Panel Saws”, these hand saws have a handle and thin flexible metal saw plate with no rigid back or frame. Hand saws have larger teeth and are generally used for quickly rough-cutting boards to length or width. These hand saws were manufactured in very large quantities and are easy to find and usually inexpensive. The specific name of this saw type also happens to be the general name of all non-power saws: “hand saw”.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.

This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
And then there are jobs that a power tool simply couldn’t (or shouldn’t) do, like cutting pegs flush. The only power-tool option is a router, and you have to make an auxiliary base to raise the router and then dial in the bit’s cut depth so that it doesn’t ruin the surface. not to mention that pegs are often used on narrow parts, like legs, where the router can tip and ruin the part.
×