My hands-down favorite thing to do is develop the process for manufacturing a new product. This involves figuring out how to design a product so that it’s not only durable and functional, but also economical to build. Then all the jigs, fixtures and CNC programs have to be created and tested until the whole process is running smoothly. Up to now, the most challenging project has been our line of wooden sunglasses which were developed for a specific client. We spent hundreds of hours just figuring out how to build the first pair then hundreds more hours refining the process until they became profitable.
We are including a source tutorial for this project in the link below. This tutorial includes detailed instructions of step by step process of this project. Ana white presents this DIY tutorial. You should read the tutorial carefully first before starting work on this project. You can see some diagrams and photos in the tutorial which helps you to understand the steps easily.
Cross-cut saw teeth are more difficult to sharpen than rip saw teeth, but very possible (I enjoy doing it). Look for cross cut hand saws with 7-9 ppi (points per inch). If you can’t see the tooth shape up close the PPI number (points per inch) can sometimes assist in identifying a hand saw as a rip hand saw or cross-cut hand saw because rip saws usually have smaller teeth. But the shape of the tooth is the best identifier if you can inspect it in person.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Aside from modern heirloom saws (like Lie-Nielsen & other high-end custom saw makers) I would stay away from any cheap hand saws manufactured after World War II. Yes, this is the same advice that I gave with hand planes. Tool quality really declined after WWII. What brands should you look for? Historically there were a lot of hand saw makers, because saws are easier to manufacture than hand planes. Here are some of the old and new quality saw makers (in alphabetical order). The blue links lead to eBay and other searches for those hand saw brands so you can compare different models (some of the antique brands are not always available on eBay, so keep checking back):
The video explains the step by step process of making a nice wooden phone stand from scratch. My first wooden holder was not the best one, but it was good enough to motivate me to make more. I now possess 10 mobile wooden stands in different shapes and styles. And if I can make this, you too can make one yourself. Search the internet for more mobile holder ideas and start making one now.
Sometimes when I notice a pattern in the emails I receive and realize that many people are asking the same question, I decide to just go ahead and write a post about it! Because clearly, there’s a need for good and EASY beginner woodworking projects to help those of you that are ready to dip your toe into the amazing and creative world of woodworking.
These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.

The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.

With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.


Woodworkers use geometry, arithmetic, algebra, calculus, and statistics to measure materials and during the planning stages of projects.  On any given job, they will calculate sizes, dimensions, distances, and quantities of materials.  Computer skills and knowledge of relevant software also benefits woodworkers with job-estimating, project management, and basic spreadsheet or word processing.  Woodworkers should be detail-oriented, have good people skills, have steady hands, and physical strength, especially when lifting 100-pound sheets of plywood.

We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
This box is the fifth generation of this design. After each production run of about 20 boxes, I make slight design changes to enhance the look and simplify the machining. Any hardwoods would work, but since the box uses so little lumber, I prefer to incorporate highly figured woods. For safety, ease of construction and consistent cuts, I use a jig for bevel-cutting the legs and another jig for beveling the top surface of the lid.
Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.

I was chit chatting on line with a very good professional furniture maker. He said something I had trouble agreeing with. “Well I’m a good craftsman but I don’t sharpen my saws” (that’s not exactly what he said, I’m just trying to make a point). I’m not willing to say the gentleman isn’t good, but neither am I willing to praise someone who can’t sharpen ALL his tools. You don’t send your chisels out to be sharpened, do you?
Figuring out how to store wine in your house? Well, it can be a tricky deal. We wanted to make our bottles accessible, but we also wanted to protect them. I made it my goal to put together all the wine bottles and with a good DIY wine rack in our house. In fact, wine racks provide you the creative ways to place or store wine bottles in your kitchen or dining room. Design, build and install your own wine rack with our wine rack ideas.
With strength, sturdiness, and durability, maple is a common material for furniture for the bedroom and even china cabinets. Maple is moisture-resistant and frequently displays stand-out swirls in the wood grain, an aesthetically pleasing differentiator from other hardwoods. While most commonly a lighter color, maple also can take stains and paint well.[13]
Craft and fine artists use a variety of materials and techniques to create art for sale and exhibition. Craft artists create handmade objects, such as pottery, glassware, textiles, and other objects that are designed to be functional. Fine artists, including painters, sculptors, and illustrators, create original works of art for their aesthetic value, rather than for a functional one.
To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
This information is taken directly from the Occupational Outlook Handbook published by the US Bureau of Labor Statistics. Truity does not editorialize the information, including changing information that our readers believe is inaccurate, because we consider the BLS to be the authority on occupational information. However, if you would like to correct a typo or other technical error, you can reach us at help@truity.com.
They both are both nice, but neither cut quite as well as the “progressive pitch” Lie-Nielsen dovetail saw that I’d tried at one of my traditional woodworking classes. The Lie-Nielsen dovetail back saw had the perfect thickness and such a comfortable pistol grip. I finally realized that I had spent more money on two dovetail saws that didn’t quite satisfy me than I had on a perfect new Lie-Nielsen dovetail saw ($125). So I ordered this dovetail saw from Lie-Nielsen, and have loved it for many years (even after buying many more dovetail saws)!

The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of

This super easy recycled pallet Christmas tree created by using some pallets is one of my favorite DIY projects. It might have all the components of your craft, a little bit new but rustic Christmas tree. It is perfect for both outdoor and indoor décor pieces! We are including the source tutorial for this DIY project below. Source tutorial includes step by step details of this process with diagrams and images.
×