Handsaws are great for getting into tight spaces, too. a coping saw is the perfect tool to cut out the waste between dovetails. The thin blade can fit into even the tightest pin socket and make a turn along the baseline, removing the waste in seconds. Chopping out waste with a chisel takes much longer, and routing it out is possible only when there’s enough clearance between the tails to fit the bit.
The amazing 15-inch hand saw has special ‘triple ground’ extra sharp teeth that can cut and rip through wood three times faster than other similar hand saws. The universal tooth grind is designed to remove material quickly, and its innovative design combines the speed of a coarse-cutting saw with the finish of a fine-cutting saw, so you can expect a clean and accurate cutting action.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.
There are two types of electric circular saws, the worm drive and the sidewinder. The worm drive saw has enough torque to cut through wet lumber and concrete. The behind-the-blade handle placement reduces kickback, and the blade’s left-side position makes it easy to see your cut line if you’re right-handed. The sidewinder’s motor, attached directly to the blade, weighs less but also has less torque.