This list has some great beginner projects to spark your inspiration; from the simple to the more elaborate. Does building furniture interest you more than making boxes? We found some projects for you that are easy to follow along with and learn the basics that you need to move on to more challenging projects. We hope that this list inspires your next project!
Re-sawing is the method for making two thinner pieces out of one board. Say you need two pieces of wood 3/8” thick, but only have a 1” thick board, you can slice the wood into to thinner pieces by cutting down the middle, making the two pieces. This is not the same as ripping, as you’re not cutting down the width of the board, but through the thickness instead.

The saw's blade is precision set and has extra sharpened teeth and it has a good amount of flexibility to give you that much-needed cutting control for all sorts of cross grain cuts. For indoor and outdoor use, the GreatNeck has a weather-resistant dark stained hardwood handle and it is very comfortable to hold. The GreatNeck hand saw is covered by a lifetime warranty.


Two children who visit me several times each summer are very fond of trains, both riding on them and playing with them, so I came up with this design. It is not meant to be an authentic model in any way. It is just for the children to play with. The engine and cars feature dovetail joinery details. When someone mentions the words “dovetail joint,” my mind automatically conjures up boxes. A dovetail jig is one of the best ways to make dovetail joint boxes, but a dovetail jig can actually be used to join any two pieces of material together at right angles. This may well be on a box, but it could also be a drawer or, as in this case, parts for a toy train.
Sometimes called “Panel Saws”, these hand saws have a handle and thin flexible metal saw plate with no rigid back or frame. Hand saws have larger teeth and are generally used for quickly rough-cutting boards to length or width. These hand saws were manufactured in very large quantities and are easy to find and usually inexpensive. The specific name of this saw type also happens to be the general name of all non-power saws: “hand saw”.
With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
No matter what woodworking or tool-related venture you're taking on, Amazon.com has the trustworthy brands delivering the helpful products you'll want, brands like Dewalt, Makita, Stanley, Black + Decker, Festool, Shop-Vac, Jet and more. You'll also find a wide range of deals and special offers on woodworking products in the Deals and Savings page. Shop on Amazon.com and get free shipping for qualifying orders.
[…] Easy woodworking projects diy ready. Want to try your skills in some easy woodworking projects? Whether you’re a beginner or an expert, you’ll find something to work on these wood craft ideas. Diy numbered wood slice coasters {easy sharpie. Create rusticchic numbered wood slice coasters with a simple stencilandsharpie method for decor and. 15 diy wood burning projects wood burning art. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy. Project gallery diy/crafts the happier. I love all these ideas but don’t have time to print them all. Do you by chance have a book of your crafts. Easy diy and crafts all about diy and crafts. The summer is already here, so where would you rather spend the rest of your hard day at work than at. 31 insanely easy and clever diy projects. Diy 31 insanely easy and clever diy projects. These are the kind of simple projects for the laziest and. 15 diy wood burning projects wood burning art diy ready. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy wood burning projects. Get into wood burning art. 15 creatively genius diy wood walls diy & crafts. These 15 themed wood walls are not only easy to diy, they’re relatively cheap. In fact, some of them may not cost you anything at all. How’s that for frugal? […]
So just make the decision: either spend $125 (pretty affordable) for a sharp and sexy new dovetail saw or spend $50-$200 on a vintage dovetail saw that will require sharpening and likely rust removal. I typically advocate buying antique woodworking hand tools, but in the case of back saws I prefer new Lie-Nielsen saws. I don’t currently see the progressive pitch saws on Lie-Nielsen’s website, but you can always call them and ask them to file one like that for you. But the normal dovetail saw will work great.
I studied forestry at Penn State University and then spent ten years working in the utility line clearance industry with the Asplundh Tree Expert Co. While building my house, I began to get into carpentry and woodworking, and later went to work as a finish carpenter. Eventually, I started taking on some minor woodworking jobs. I realized I needed some real shop experience, so I took a job in a stair shop building custom staircases for about five years. While there, I began to set up a shop of my own with the intention of going into business for myself, which I did in 1998. I’ve been on my own since.My typical day is usually pretty simple. I’ll spend an hour in the morning on the computer promoting my shop and looking for leads. Around 8:00 A.M. I open up the shop and work on whatever I’m doing until 4:00 or 5:00 P.M.
With the right tools, you can crank one of these bad boys out in less than a day’s work. It’s definitely more of a niche item, but don’t be fooled into thinking that it’s not versatile! You can use one of these to display a bowling trophy, a prized-collectible action figure, a family photo that has to stand out from the rest, and even most foods that don’t taste like cake!
Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.
It has a narrow and tapered blade, usually pointed at the end. A compass saw typically has about 8-10 teeth per inch, which can go up to 20 teeth per inch if you are cutting harder materials. A compass saw comes with a pistol grip, which is best suited if you are working in confined places. The pointed end helps you penetrate soft materials without requiring a pilot hole.
Some woodworkers obtain their skills by taking courses at technical schools or community colleges. Others attend universities that offer training in wood technology, furniture manufacturing, wood engineering, and production management. These programs prepare students for jobs in production, supervision, engineering, and management, and are becoming increasingly important as woodworking technology advances.
Figuring out how to store wine in your house? Well, it can be a tricky deal. We wanted to make our bottles accessible, but we also wanted to protect them. I made it my goal to put together all the wine bottles and with a good DIY wine rack in our house. In fact, wine racks provide you the creative ways to place or store wine bottles in your kitchen or dining room. Design, build and install your own wine rack with our wine rack ideas.
If a woodworker wishes to advance in the field or to demonstrate competence in the industry, they may also choose to become licensed. The Woodwork Career Alliance of North America offers a national certificate program. The AWI, or Architectural Woodwork Institute sets standards for the industry and offers training programs for management and mid-management positions.
A small oak table is a very useful wooden item for every household. You can yourself make a nice, strong and beautiful oak table suitable for any purpose. See the image below. As you can see, it is a small, yet good enough table to be used as a coffee table, lamp stand, breakfast table, etc. You can also find many other design variants on the internet. Choose the one you want for yourself and start making it now.

Some might expect to see a cordless drill on this list, but when we're talking about basic power woodworking tools, a corded drill is more versatile and powerful. Sure, the cordless is, well, cordless, which makes it more portable, but corded drills are less expensive and can do more than a cordless drill. There are some options to consider when choosing a corded power drill, such as whether you want a 3/8-inch or 1/2-inch chuck, keyed or keyless chuck, straight drill or hammer drill, and so on. Learn all about these options (along with some suggestions on what to look for when shopping) in this article on corded power drills.
Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

If you want a new headboard and you are willing to give your bedroom a new awesome country look, you can build a rustic headboard for your bed from that looks like an old barn door. This rustic wooden headboard project can be done with just about any material you have, and if you really willing to give it the rustic look, you can use some pallet boards.
The highly popular Vaughan Pull Stroke Japanese-style Rip 12-inch Hand Saw has been made according to Vaughan's strict manufacturing specifications and it features a thin, spring-steel blade which is durable and rust resistant. As the Vaughan hand saw is specially designed to cut on the pull rather than on the push stroke action, it is a good choice for more demanding woodworking tasks.
Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need.
Craft and fine artists use a variety of materials and techniques to create art for sale and exhibition. Craft artists create handmade objects, such as pottery, glassware, textiles, and other objects that are designed to be functional. Fine artists, including painters, sculptors, and illustrators, create original works of art for their aesthetic value, rather than for a functional one.
Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.

I learned about the trade from my father starting when I was 6 years old. I took woodshop courses in high school, and was granted the Industrial Arts Award my senior year. I also took some college courses in woodshop before I started my own business when I turned 19.My average work day is laying out jobs, cutting parts, designing the different jobs, and assembling the cabinets. I also am teaching my daughter how to build woodworking projects and cabinet parts, as well as helping with our cutting boards.

Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below

Woodcraft is quite possibly one of the best forms of expressing the artist in. It looks so simple yet so intricate. It helps you reconnect with nature on a spiritual level. It is dangerously addictive as people who pursue this hobby have been known to spend hours at a time working on a simple project by using various woodworking tools and never quite know it.
Although not required, becoming certified can demonstrate competence and professionalism. It also may help a candidate advance in the profession. The Architectural Woodwork Institute (AWI) offers a national certificate program, which adds a level of credibility to the work of woodworkers. The Woodwork Career Alliance of North America also offers five progressive credentials.
Of course, there’s the occasional install, client meeting or photo-shoot, but those don’t happen often enough to be considered a typical day. I should mention that every day brings its share of phone conversations with clients and suppliers. That happens at all hours. Most work days end by 7:30pm, and once I’m home and have eaten supper, I’ll usually put another hour into handling whatever financial, legal or internet tasks are most pressing at the time. Altogether, a typical work day is about 12 hours, and this is 6 days a week. At 2 1/2 years old, the business is still a start-up which is the reason such long hours are necessary.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The shelf in the first picture is made of red oak plywood. You can choose the wood type, color and design as you like for your project. In case if you need more help understanding this project, you can refer the source link below. It discusses various items used, steps and tips and personal experience of the author who personally built a Zigzag shelf.
Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer/wine Bottle caddy. The video tutorial explains every step properly so that anyone can make a Beer bottle caddy easily.
I went through the handsaw epiphany a few years back. Hadn’t used a well sharpened handsaw since I was a kid, and didn’t understand why my later attempts at using hand saws seemed to end in discontent. I avoided saws without tails for years, then stumbled across an old D8 Thumbhole. Research on the internet led me to several good sites on saws and sharpening and when I gave it a shot I was amazed at how well even my shoddily sharpened saw worked. Saw sharpening is truly not difficult to do, and you get better at it real fast. I take an old Disston #112 crosscut that I rehandled with me to the wood store and you ought to see the looks when folks see me in the parking lot breaking those 12 foot long boards down by hand to a size more amenable to being carried home in the back of my truck.

This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
This practical entryway storage unit is made from solid wood and is glued together: no nails or screws (apart from those that hold it to the wall) are used. In this case, we made it out of soft maple, but it could be made from any good quality solid wood: pine, oak, birch, fir…whatever best matches the trim or furnishings in the place where it will be mounted to the wall.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a Pallet dining table. So, I searched for a plan design idea and build a very own beautiful pallet dining table. I was an amazing DIY plan, I just love it!

Some people prefer to watch video tutorial instead of having a source tutorial. For them, we are including a YouTube video tutorial for building a Pallet Christmas tree. Although, the Christmas tree DIY in the video tutorial is little different from the one in the source tutorial and the one shown in the image above. But it will also help you to build a new Christmas tree using some pallets.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Who doesn’t want to have one awesome and handy wooden desk organizer that not only looks beautiful but can store all your mini office desk items properly? See the picture below. I am sure you will love this one. I have already built one myself as I just could not resist having one at my office. This thing easily stores all my office desk essentials, including pen, pencils, marker, small notebooks, etc. in the most organized way. You can see it yourself.
This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.

Woodworkers will find every tool needed to complete professional jobs and hobby projects. Outfit your workshop with routers and sanders, table saws and dust collectors, Fein MultiMasters, and Sonicrafters. Amazon.com carries the woodworking precision machinery and essential tools you need to frame, cut, carve, saw, drill, sand, trim, craft, and finish your masterpiece. Discover the bestselling brands including Makita, Festool, Bosch, JET, Powermatic, Rockler, Grizzly, and more in the Woodworking Shop at Amazon.com. The comprehensive selection of wood chisels, lathes, jig saws, hardware, and woodworking plans will equip carpenters and woodturners. FREE Super Saver Shipping is available for select items.
When you’re making furniture, there are always small parts-like moldings, pulls, drawer stops, and pegs-that need to be cut to length. Instead of using a tablesaw, which could destroy those delicate parts in a flash, I use a Western-style carcass backsaw. A crosscut saw with about 12 to 14 tpi and a blade that’s a bit taller and longer than on a dovetail saw can easily make clean, accurate cuts in parts up to 1 in. thick and 3 in. to 4 in. wide. To increase accuracy, I use the saw with a sawhook, which is simply a flat board with a square fence (and a cleat that goes in your vise). The hook is great because it gives you a way to hold the workpiece still during the cut (both you and the saw press it against the fence) and helps to keep the saw cutting straight and square.
What I like most about my work is the satisfaction of building something useful and attractive, or even beautiful, out of a pile of raw materials. There is nothing more satisfying than when a complex piece, composed of dozens of parts, each one individually handmade, comes together. The thing I like the least is the business side, such as bookkeeping, promoting my business, etc. If you have a mind for business and the talent to create, this would be the perfect combination.

Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:


If you can only afford one initial hand saw, then get a rip saw. A rip saw can indeed make cross cuts (cutting the board to length) though it will require more cleaning up than if you use a cross cut hand saw (read more below). But it is much more difficult to rip a long board with a cross-cut saw. Rip saws are simple to sharpen and refurbish. I have a good number of rip hand saws from different saw makers, but mostly Disston saws. If you find multiple old hand saws for a good price, you can certainly sharpen and set them in different ways to make certain jobs easier. Some of the desirable models of Disston saws are the Disston #16 hand saw, Disston #D-8 hand saw (with thumb holes is desireable), Disston #12 hand saw, among others.
Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work. Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
A clean well-organized environment is key to staying A clean well-organized environment is key to staying happy. The same goes for your desk. Keep the clutter at bay and organize all of your small essentials with the Dickies Work Gear 57012 Mug Organizer. Designed to fit over most mugs this clever caddy features 8 outer pockets and 6 ...  More + Product Details Close
And finally, we ended up with an original, elegant, functional and an inexpensive bar that we were able to make ourselves. Even though this shelf project was created as a simple way of adding some useful decorative pieces. Check out our this DIY beautiful piece which is made of reclaimed pallets. It doesn’t involve any scrap, but it is still the project that will look elegant in your room.
×