I confess that I went a little crazy and treated myself to a scroll saw and a lathe, so I am hoping to have many more woodworking projects in the near future. Eeeeek, I can’t wait. By clicking on either the photo or the link you will be directed to each DIY woodworking project. Click over to get free woodworking plans and instructions on how to complete each project. Please PIN the main post, or from each source post and not individual images in this post.
If you are cutting across the grain of the wood, you need a cross cut saw. The teeth on a cross cut saw are angled straight up and have a beveled edge like a knife point. This cross cutting design allows the saw to act like a sharp knife that cleanly slices across the wood’s grain and severs each of the fibers. When you use the cross cut saw, you use a push and pull action.
There’s no denying the value of a handmade gift. There’s still time to make a project and have it ready to give as a gift this holiday season. Here are fifteen woodworking projects that would make great holiday gifts for a wide range of people. Most are not difficult and some can be completed in a day. You can probably build a few of them with scraps you have around your shop. Just click on the project name to go to the full project article.
IAM Mobile 4.0 offers more features and functions to read and share information about our union and the important issues we face as working families. This app combines all of the IAM's popular online functions such as the IAM Journal, the Machinists News Network on demand video service, the IAM webpage GOiam.org, iMail, an IAM Photo Gallery, the IAM Facebook Page, and lots more -- all in one easy-to-access App for tablets and smartphones.
If you can only afford one initial hand saw, then get a rip saw. A rip saw can indeed make cross cuts (cutting the board to length) though it will require more cleaning up than if you use a cross cut hand saw (read more below). But it is much more difficult to rip a long board with a cross-cut saw. Rip saws are simple to sharpen and refurbish. I have a good number of rip hand saws from different saw makers, but mostly Disston saws. If you find multiple old hand saws for a good price, you can certainly sharpen and set them in different ways to make certain jobs easier. Some of the desirable models of Disston saws are the Disston #16 hand saw, Disston #D-8 hand saw (with thumb holes is desireable), Disston #12 hand saw, among others.

I studied forestry at Penn State University and then spent ten years working in the utility line clearance industry with the Asplundh Tree Expert Co. While building my house, I began to get into carpentry and woodworking, and later went to work as a finish carpenter. Eventually, I started taking on some minor woodworking jobs. I realized I needed some real shop experience, so I took a job in a stair shop building custom staircases for about five years. While there, I began to set up a shop of my own with the intention of going into business for myself, which I did in 1998. I’ve been on my own since.My typical day is usually pretty simple. I’ll spend an hour in the morning on the computer promoting my shop and looking for leads. Around 8:00 A.M. I open up the shop and work on whatever I’m doing until 4:00 or 5:00 P.M.
I’m often asked, “what is the best hand saw?” It’s hard to narrow down all the many brands to one best hand saw, but I will recommend some quality new and antique saw brands. The great thing is that you can find great old hand saws for as low as $5. But before I discuss the urgent, semi-urgent, and non-urgent hand saws that you need, let’s talk about new and antique hand saw brand names / manufacturers (this will apply to all the types of hand saws below).
I think the number of teeth cooresponds to stock thickness. I like to have 6 teeth in the kerf. So working with 4/4 stock mostly, I like a 4 tpi rip saw. I don’t do a lot of "rough" cross-cuts. I tend to plane first and x-cut later and often for the last time. So my x-cut saw is about 12tpi. For basic stock prep I only use a few saws- my 4 tpi rip saw, my 20" x-cut panel saw, and a fine rip saw for thin stock. For narrow stock and precision cuts I use a 14" x-cut backsaw, 12-14tpi.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
Frame saws (or “bow saws” or “turning saws”) use tension to tighten a blade between two saw arms. When used with a narrow blade, a frame saw works great for cutting curves (similar to a power bandsaw) and can also be used for rough cutting boards when a larger blade is added. Frame saws come in all sorts of sizes, with small teeth for fine work to large teeth for rough-cutting.

Bethany Sy is the creative free-spirit behind DIY/Lifestyle blog, Reality Daydream. She and her husband have been making their 117-year-old homestead their own, and love sharing tips and tutorials along the way. When they found themselves in the trenches of infertility, they started a journey that would prove to be their most important DIY project ever, and have 3 beautiful girls to show for it.
Any serious woodworker knows that square and flat Any serious woodworker knows that square and flat stock is the key to producing fine work so it’s time to skip the hand tools and graduate to the JJ-6HHDX 6 in. long bed jointer. This beast boasts a helical insert cutter head with staggered carbide inserts yet runs quietly and ...  More + Product Details Close
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
Some people prefer to watch video tutorial instead of having a source tutorial. For them, we are including a YouTube video tutorial for building a Pallet Christmas tree. Although, the Christmas tree DIY in the video tutorial is little different from the one in the source tutorial and the one shown in the image above. But it will also help you to build a new Christmas tree using some pallets.

Although the term “woodworker” may evoke the image of a craftsman who uses hand tools to build ornate furniture, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work with great accuracy.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.

Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
What I like most about my work is the satisfaction of building something useful and attractive, or even beautiful, out of a pile of raw materials. There is nothing more satisfying than when a complex piece, composed of dozens of parts, each one individually handmade, comes together. The thing I like the least is the business side, such as bookkeeping, promoting my business, etc. If you have a mind for business and the talent to create, this would be the perfect combination.
Don’t be afraid to ask if there are internship or apprenticeship opportunities. Even if you’re declined, people will know you’re looking, and if you continue to hang out in their circles and demonstrate that you’d be a model employee, someone will take notice. There’s no shortage of woodworkers, but there is a severe shortage of enthusiastic and phenomenal woodworkers. 
×