Working with the Stanley hand saw is a handyman's dream as its three cutting surfaces can cut up to 50% faster than conventional saws, and its “Induction hardened” teeth stay sharp up to 5 times longer than standard teeth, so you can expect a high level of durability and cutting performance. It is especially good at cutting quick lumber cuts and it is sharp enough to trip 2-inch tree limbs.


Shorter hand saws (around 20-inches long) are officially called “panel saws” because they can fit in the panel of a large tool chest, and they are more suited for fine furniture making. Most normal hand saws run from 24-inches to 30-inches long. Many people mistakenly call all saws of this type “panel saws”. But don’t be rude and correct them! Try out different sizes to see what length you’re comfortable with.

When many people hear the word woodworker, the image of someone leaning over a workbench sanding a long piece of wood with his or her hands. However, modern woodworking requires training on highly technical machinery, such as CNC (computerized numerical control) machines.  Even woodworkers caught somewhere between modern equipment and a hand planer typically use CNC machines to fabricate large or intricate products.  If working for a large company, a lot of the work will be done on an assembly line or in various areas on the floor designated to complete a particular part of a project.   The tasks will be handled by different workers with very specialized training on each machine. For example, one machine might cut a large piece of wood into three sections, whereas another machine might take one of the sections and round each edge.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer/wine Bottle caddy. The video tutorial explains every step properly so that anyone can make a Beer bottle caddy easily.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

If you have more complex woodworking or carpentry jobs, choose a hand saw that is tailor made for these tasks like the Vaughan BS240P Pull Stroke Rip Handsaw or the Crown FLINN1 10-Inch Dovetail Saw. Also, the type of hand saw will depend on whether you be cutting with the grain or across the grain. There are 3 main types of basic hand saws: a cross cutting saw, a rip saw, and a dovetail back saw.

Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
A hand saw is an indispensable hand tool that offers you a lot of cutting versatility. It can be used for all sorts of projects or tasks, like trimming tree limbs, cutting up hardwood lumber from a felled tree, building a house, cutting up floor boards for a home renovation, fine detailed joinery work, or cutting through PVC plastic pipes. Whatever type of cutting you you have to do, the hand saw can do it all.
Another classic game! (Are you picking up on a trend?). A cribbage board is really just a piece of wood with 240-plus holes drilled in it. This project includes files necessary to program a CNC machine to drill all the holes, but it also includes a template for boring the holes with a drill. There are endless opportunities for customizing this project with different species of wood. All this adds up to the fact that cribbage boards make great gifts.

Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.

Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
My hands-down favorite thing to do is develop the process for manufacturing a new product. This involves figuring out how to design a product so that it’s not only durable and functional, but also economical to build. Then all the jigs, fixtures and CNC programs have to be created and tested until the whole process is running smoothly. Up to now, the most challenging project has been our line of wooden sunglasses which were developed for a specific client. We spent hundreds of hours just figuring out how to build the first pair then hundreds more hours refining the process until they became profitable.
Stranded: Here is a link; http://www.leevalley.com/US/shopping/Instructions.aspx?p=41059 to some info for the various Japanese saws where they briefly discuss using two hands and also mention Westerners having a problem with that technique? Just to take the topic a little further: If you are doing small dovetails or small tenons, you might get away with one hand because the depth of cut is usually shallow. And if you are using a Japanese dovetail saw with back stiffener that will help with tracking. Personally I like to start my cut with one hand (1/16-1/8" depth), usually on the corner closest to me then switch to two hands always with a gentle grip to let the saw do the cutting, sometimes with a dusting of pounce on my hands for a better grip, but not tight. I have been using this technique for many years and still find little subtleties (mindfulness) that provide improvement. Practice, Practice, Practice--Enjoy, Mainewood
A dovetail back saw, like the Crown FLINN1 10-Inch Dovetail Saw, is specially designed for working with hard and soft woods and for fine woodworking applications that need very precise, small cuts and a nice neat finish. These types of hand saws are for making dovetail joints where two wood pieces should fit perfectly together. The dovetail saw has a small blade that is more rigid than the cross cutting or rip saw so that it can cut nice straight lines on shorter pieces of wood, and it has more TPI, which means it can create a neater finish. The dovetail hand saw also has a cylindrical handle that can be turned freely in your hand, which gives you greater control over the shape of the cuts you need to make with the wood.

Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.

The source above is not exactly a tutorial, but it gives you a basic idea of how the author built a Quirky Pallet Art to enhance the look of their old house. You can also find another tutorial at the link below. It shares a step by step procedure for making a wooden pallet sign. The final product is not exactly the same as the one above, but the basic idea is the same.


The source above is not exactly a tutorial, but it gives you a basic idea of how the author built a Quirky Pallet Art to enhance the look of their old house. You can also find another tutorial at the link below. It shares a step by step procedure for making a wooden pallet sign. The final product is not exactly the same as the one above, but the basic idea is the same.

Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
Ultimately, to be a woodworker, just start doing it. Read about it, watch it on television, accumulate tools, look for openings of any kind in a shop, a sawmill, a lumberyard, any place related to the woodworking business. Start making things. Learn carpentry. A good cabinetmaker should also be an excellent carpenter. Build up a portfolio of work, and acquire skills and knowledge any way you can.

Bandsaws provide a unique capability to create large scale, curvaceous compound cuts. Just think of the capabilities that this provides for projects such as a cabriole leg, duck decoy, spatula, etc. The possibilities for three dimensional shaping are virtually endless with a bandsaw! This cool process can actually be performed using two dimensional patterns that
This super easy recycled pallet Christmas tree created by using some pallets is one of my favorite DIY projects. It might have all the components of your craft, a little bit new but rustic Christmas tree. It is perfect for both outdoor and indoor décor pieces! We are including the source tutorial for this DIY project below. Source tutorial includes step by step details of this process with diagrams and images.
Woodworkers typically have an interest in the Building and Organizing interest areas, according to the Holland Code framework. The Building interest area indicates a focus on working with tools and machines, and making or fixing practical things. The Organizing interest area indicates a focus on working with information and processes to keep things arranged in orderly systems.

With the right tools and materials, what you build is only limited by your imagination and creativity. So why not have a little fun with the kids and teach them something at the same time? Our woodworker tools and woodworking supplies will help you put together an easy birdhouse, squirrel feeder or butterfly house. The kids will love to use our paint samples to add their creative touch, and will enjoy displaying the finished product in the backyard.

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!


No matter, if you have a modern home or a rustic type house, there would be a lot of ideas for you in this collection. This is another woodworking project that I love the most. You will enjoy building this one and also learn a lot. Some more designs you can find on the internet of DIY Wall corner shelves. Select the one of them that matches your woodworking skills and start building that. We are also providing a link where you can find more ideas about building wall shelves DIY. Check the link below:
×