Cross-cut saw teeth are more difficult to sharpen than rip saw teeth, but very possible (I enjoy doing it). Look for cross cut hand saws with 7-9 ppi (points per inch). If you can’t see the tooth shape up close the PPI number (points per inch) can sometimes assist in identifying a hand saw as a rip hand saw or cross-cut hand saw because rip saws usually have smaller teeth. But the shape of the tooth is the best identifier if you can inspect it in person.


Some tools that are required for this project are a hammer, chisels, sanding sponges, tack cloth, stain brushes and face mask, etc. You can make one of these end tables and put in your bedroom. You can also take some different ideas to build a pallet end table from the internet, we are also providing a link, select the one design from the link and start building your very own tree side stump table.


The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

We offer the best hand saws for woodworking. A fine hand saw's image has long been the emblem of a craftsman at work. Used for carpentery, dovetailing, joinery and many other tasks around the shop, we stock a large variety of hand saws. You will find the hand saw you need among our selection of British Bowsaws, Gent's Saws and Tenon Saws, our extensive collection of Japanese Hand Saws, and the fine hand saws of Lie Nielsen. Be sure to check out the newest additions to our Backsaw collection from Bad Axe Tool Works - the ultimate in premium hand saws, made in the USA. Selecting the best hand saws for woodworking can be daunting, to help sort through all the options we recommend reading Essential Woodworking Hand Tools by Author Paul Sellers. His book includes a lengthy chapter on hand saws to help you decide which hand saws you need in your workshop.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
I’m often asked, “what is the best hand saw?” It’s hard to narrow down all the many brands to one best hand saw, but I will recommend some quality new and antique saw brands. The great thing is that you can find great old hand saws for as low as $5. But before I discuss the urgent, semi-urgent, and non-urgent hand saws that you need, let’s talk about new and antique hand saw brand names / manufacturers (this will apply to all the types of hand saws below).
Shelves usually come as very handed furniture pieces in your house. This practical shelf is made out of pallets and in a very short period of time it built. We are including a source tutorial to this DIY wood shelf project. The tutorial includes all the steps with details and also having diagrams and images in every step. The good thing is that the author also included a Vimeo video tutorial for this project in the source tutorial.
Although the term “woodworker” may evoke the image of a craftsman who uses handtools to build ornate furniture, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work with great accuracy.
I went through the handsaw epiphany a few years back. Hadn’t used a well sharpened handsaw since I was a kid, and didn’t understand why my later attempts at using hand saws seemed to end in discontent. I avoided saws without tails for years, then stumbled across an old D8 Thumbhole. Research on the internet led me to several good sites on saws and sharpening and when I gave it a shot I was amazed at how well even my shoddily sharpened saw worked. Saw sharpening is truly not difficult to do, and you get better at it real fast. I take an old Disston #112 crosscut that I rehandled with me to the wood store and you ought to see the looks when folks see me in the parking lot breaking those 12 foot long boards down by hand to a size more amenable to being carried home in the back of my truck.
As part of the job, woodworkers prepare and operate saws, drill presses, routers, sanders, lathes, shapers, milling machines, and planers.  Often using a template, woodworkers measure and verify dimensions, cut, and shape wooden parts. Woodworkers stain or coat the wood products with sealers and topcoats, such as varnish and lacquer. But, they also often install hardware, fit electrical components and specialty products, such as metal trims and glass.
Any serious woodworker knows that square and flat Any serious woodworker knows that square and flat stock is the key to producing fine work so it’s time to skip the hand tools and graduate to the JJ-6HHDX 6 in. long bed jointer. This beast boasts a helical insert cutter head with staggered carbide inserts yet runs quietly and ...  More + Product Details Close
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
If you are cutting across the grain of the wood, you need a cross cut saw. The teeth on a cross cut saw are angled straight up and have a beveled edge like a knife point. This cross cutting design allows the saw to act like a sharp knife that cleanly slices across the wood’s grain and severs each of the fibers. When you use the cross cut saw, you use a push and pull action.

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
×