Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
The last tool I recommend for every beginning woodworker is a quality router. While many routers available today offer two different bases (a stationary base and a plunge router base), for most beginners, a quality stationary base model will take care of quite a number of tasks, and can also be mounted in a router table should you choose to invest in (or even build one) one down the line. Choose a router model that is at least 2-HP and has electronic variable speed controls (as larger cutting bits should use slower speeds), a soft start mechanism and is easy to make bit changes (preferably with the ability to use both 1/2-inch and 1/4-inch shank router bits).
There are many other great tutorials you can find on the internet, but they all need many tools to build. You might not have a table saw, a router, or miter saw and of course, it costs hundreds of dollars. And you can sell this Deck cooler at almost no cost and make a handsome profit. By having a drill and impact driver plus any type of saw, you can build it easily.
So just make the decision: either spend $125 (pretty affordable) for a sharp and sexy new dovetail saw or spend $50-$200 on a vintage dovetail saw that will require sharpening and likely rust removal. I typically advocate buying antique woodworking hand tools, but in the case of back saws I prefer new Lie-Nielsen saws. I don’t currently see the progressive pitch saws on Lie-Nielsen’s website, but you can always call them and ask them to file one like that for you. But the normal dovetail saw will work great.
The GreatNeck Hand Saw is proudly made in the USA and it is an excellent choice for all-purpose woodworking applications. With a strong high carbon 26-inch steel blade and 10 teeth-per-inch (TPI), the GreatNeck is a highly versatile tool that you can use for rougher, more aggressive cuts as well fine, detailed cuts and it will cut effortlessly through all types of wood from soft wood to hardwood lumber such as red oak and maple, so all of your projects will be done quickly and efficiently.
Sound overwhelming? Then just start off focusing on Disston saws. The Disston saws were manufactured by the millions and are the easiest to find, and most are of exceptional quality, especially the below common models. Remember to buy pre 1940’s era vintage hand saws. Here are some ebay searches for wood saws. To ensure that you don’t over-pay, when you’re on ebay click “sold” to see what they’re selling before and to see which saws are desirable. It’s fun research:
The moment we first saw this group’s master lather begin his work, we knew we’d found someone special.  He’s a quiet, steady-handed worker. He smiles and lets his group’s work speak for itself.  And it does. We watched in awe as he chipped away angled pieces of wood from a solid block of thick Mugavu – all done “Michelangelo-style” right in front of our eyes.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
"Mike was referred to me by a family member. I enjoyed his attitude and attentiveness to what my ideas were for my basement. He did the framing in the basement and built two bedrooms and added the bathroom. He was a huge help in designing the area because I needed the bedrooms to be built where the egress windows are. He was always professional and responsive. I highly recommend Mike to anyone needing a carpenter for anything."
As part of the job, woodworkers prepare and operate saws, drill presses, routers, sanders, lathes, shapers, milling machines, and planers.  Often using a template, woodworkers measure and verify dimensions, cut, and shape wooden parts. Woodworkers stain or coat the wood products with sealers and topcoats, such as varnish and lacquer. But, they also often install hardware, fit electrical components and specialty products, such as metal trims and glass.
"Cody did such a incredible job! He not only gave me my dream kitchen, but he was also so personable, professional, and kind. While he was here I also had some other things that needed fixed around the house and he was happy to help with. A master of all trades. 10/10 have recommended to all my friends and will have him do future things to our home when needed."
Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
Woodworkers typically have an interest in the Building and Organizing interest areas, according to the Holland Code framework. The Building interest area indicates a focus on working with tools and machines, and making or fixing practical things. The Organizing interest area indicates a focus on working with information and processes to keep things arranged in orderly systems.

What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
And then there are jobs that a power tool simply couldn’t (or shouldn’t) do, like cutting pegs flush. The only power-tool option is a router, and you have to make an auxiliary base to raise the router and then dial in the bit’s cut depth so that it doesn’t ruin the surface. not to mention that pegs are often used on narrow parts, like legs, where the router can tip and ruin the part. 

When you’re making furniture, there are always small parts-like moldings, pulls, drawer stops, and pegs-that need to be cut to length. Instead of using a tablesaw, which could destroy those delicate parts in a flash, I use a Western-style carcass backsaw. A crosscut saw with about 12 to 14 tpi and a blade that’s a bit taller and longer than on a dovetail saw can easily make clean, accurate cuts in parts up to 1 in. thick and 3 in. to 4 in. wide. To increase accuracy, I use the saw with a sawhook, which is simply a flat board with a square fence (and a cleat that goes in your vise). The hook is great because it gives you a way to hold the workpiece still during the cut (both you and the saw press it against the fence) and helps to keep the saw cutting straight and square.
Our top pick for the best hand saw is the IRWIN Tools Universal Hand Saw. You can rely on the Irwin Tools Universal hand saw to deliver a top quality cutting performance every time. Whether you have DIY renovations to complete around your home or you are a professional tradesman who needs a reliable hand saw that you can trust for all of your on-site jobs, the IRWIN universal hand saw is the only saw you will ever need.
For an artisanal look, you can use woodworking hand tools. These are easy to use, lightweight and require no batteries or power cords to operate. Many hand tools are covered by multi-year or even lifetime warranties for extra protection and value. Set up your pieces with the most expertly crafted woodworking hardware, such as hinges, pulls and knobs to create a final product that you can give as a gift, sell or just display proudly.
There are many factors to consider when deciding what type of wood to use for a project. One of the most important is the workability of the wood: the way in which it responds when worked by hand or tools, the quality of the grain, and how it responds to adhesives and finishes.[9] When the workability of wood is high, it offers a lower resistance when cutting and has a diminished blunting effect on tools.[9] Highly workable wood is easier to manipulate into desired forms. If the wood grain is straight and even, it will be much easier to create strong and durable glued joints. Additionally, it will help protect the wood from splitting when nailed or screwed.[9] Coarse grains require a lengthy process of filing and rubbing down the grain to produce a smooth result.[9]
Although not required, becoming certified can demonstrate competence and professionalism. It also may help a candidate advance in the profession. The Architectural Woodwork Institute (AWI) offers a national certificate program, which adds a level of credibility to the work of woodworkers. The Woodwork Career Alliance of North America also offers five progressive credentials.
Have you considered picking up woodworking? No? Now might be the time to consider it! There are so many things that you can make for a fraction of the price you can buy them for, not to mention you can customize everything you make. Woodwork projects also make great gifts and you can tell everyone that you made it by hand! What is better than that?
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Some of our readers prefer watching a video tutorial instead of heaving a written tutorial. For those readers, we are including a YouTube video tutorial for this project, Although, these are two a few different designs in both of the tutorials, but both of them help you in a better way to build two awesome wooden coat rack. You can find the video tutorial in the link below.
They both are both nice, but neither cut quite as well as the “progressive pitch” Lie-Nielsen dovetail saw that I’d tried at one of my traditional woodworking classes. The Lie-Nielsen dovetail back saw had the perfect thickness and such a comfortable pistol grip. I finally realized that I had spent more money on two dovetail saws that didn’t quite satisfy me than I had on a perfect new Lie-Nielsen dovetail saw ($125). So I ordered this dovetail saw from Lie-Nielsen, and have loved it for many years (even after buying many more dovetail saws)!
What I like most about my work is the satisfaction of building something useful and attractive, or even beautiful, out of a pile of raw materials. There is nothing more satisfying than when a complex piece, composed of dozens of parts, each one individually handmade, comes together. The thing I like the least is the business side, such as bookkeeping, promoting my business, etc. If you have a mind for business and the talent to create, this would be the perfect combination.

Sharpening a saw is not hard. Type “saw sharpening” into your favorite web browser tonight, buy a couple files, and get to it. Here’s my trick: count your strokes. If the teeth are fairly uniform in their dullness (i.e. a tiny white snow cap, roughly the same size, appears on each, not every other tooth) just use one or two strokes per tooth. Do only the teeth set near you, then turn the saw around and do the other side.
Using these floating shelves in your room or kitchen is a great way to arrange and de-clutter space… I know, such groundbreaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.

Throughout the years I’ve read accounts of people who “discovered” hand planes and had it change their lives. “I was a cabinetmaker for 30 years” they write, “then I” read this article or took this class “and I sharpened my plane iron and now I know what I was missing for all those years”. As I write this I know many of you are nodding in agreement. I know that happened to you too. It happened to me too.
A clean well-organized environment is key to staying A clean well-organized environment is key to staying happy. The same goes for your desk. Keep the clutter at bay and organize all of your small essentials with the Dickies Work Gear 57012 Mug Organizer. Designed to fit over most mugs this clever caddy features 8 outer pockets and 6 ...  More + Product Details Close
[…] Easy woodworking projects diy ready. Want to try your skills in some easy woodworking projects? Whether you’re a beginner or an expert, you’ll find something to work on these wood craft ideas. Diy numbered wood slice coasters {easy sharpie. Create rusticchic numbered wood slice coasters with a simple stencilandsharpie method for decor and. 15 diy wood burning projects wood burning art. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy. Project gallery diy/crafts the happier. I love all these ideas but don’t have time to print them all. Do you by chance have a book of your crafts. Easy diy and crafts all about diy and crafts. The summer is already here, so where would you rather spend the rest of your hard day at work than at. 31 insanely easy and clever diy projects. Diy 31 insanely easy and clever diy projects. These are the kind of simple projects for the laziest and. 15 diy wood burning projects wood burning art diy ready. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy wood burning projects. Get into wood burning art. 15 creatively genius diy wood walls diy & crafts. These 15 themed wood walls are not only easy to diy, they’re relatively cheap. In fact, some of them may not cost you anything at all. How’s that for frugal? […]
With its thin blade and tall frame, the coping saw is adept at cutting curves. It was used in the past to cope molding to get perfect miters. But I use it when cutting dovetails. I was taught to chop out all of the waste with a chisel-a tedious job. When I tried sawing out the waste with a coping saw, it was a watershed moment for me and I’ll never go back. You don’t need a superexpensive frame, but don’t go with a hardware store cheapy, either. I spent about $20 on mine and it’s easy to tighten and adjust the blade. The handle is comfortable, too. As for blades, get ones with a fine cut. They cut slower, which means the saw is less likely to jump the kerf at the end of the cut and damage the tail or pin.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
If you’ve ever found yourself at the lumberyard with several boards that are too long for the bed of your truck, you’ll appreciate having a panel saw. Carrying around a circular saw and hoping to find an outlet is more hassle than it’s worth. But leaving a panel saw (8 to 12 tpi) in the truck is no problem. Lay the boards in the bed with the gate down, and cut them to fit. I even use a panel saw in the shop to cut a board to rough length when it’s too big for my chopsaw.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.

There are many different bed plans of various sizes you can find on different sites on the internet. Many of them can also be modified to make you able that you can get the exact look and size you want. Our first woodworking project is also about such a Bed plan that is elegant and you can also modify the plan if you want. A queen sized storage bed plan, which makes you able to build a big project of storage bed that can sell the most and make you some profit.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.

Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, lathes, shapers, routers, sanders, planers, and wood-fastening machines. Operators set up the equipment, cut and shape wooden parts, and verify dimensions, using a template, caliper, and rule. After the parts are machined, woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. They also install hardware, such as pulls and drawer slides, and fit specialty products for glass, metal trims, electrical components, and stone. Finally, workers then sand, stain, and, if necessary, coat the wood product with a sealer or topcoats, such as a lacquer or varnish.

Hey Great Article,Thanks. 4 months ago, I started looking for woodworking.The industry is extremely interesting,but I have problems with how I can do it.My uncle who has been doing more than me in this industry,has suggested to me to follow Teds plans.Do you think it’s a good move to follow these plans??I keep reading good reviews about Teds plans but I am unsure if it will still work on me.At this time I can purchase these plans at a very low price,so if possible can you leave me feedback on whether I should do it or not. It would mean a lot coming from an expert in this field.
Although the term “woodworker” may evoke the image of a craftsman who builds ornate furniture using hand tools, the modern woodworking trade is highly technical and relies on advanced equipment and highly skilled operators. Workers use automated machinery, such as computerized numerical control (CNC) machines, to do much of the work. Even specialized artisans generally use a variety of power tools in their work. Much of the work is done in a high-production assembly line facility, but there is also some work that is customized and does not lend itself to being made in an assembly line.
The shelf in the first picture is made of red oak plywood. You can choose the wood type, color and design as you like for your project. In case if you need more help understanding this project, you can refer the source link below. It discusses various items used, steps and tips and personal experience of the author who personally built a Zigzag shelf.
Aside from modern heirloom saws (like Lie-Nielsen & other high-end custom saw makers) I would stay away from any cheap hand saws manufactured after World War II. Yes, this is the same advice that I gave with hand planes. Tool quality really declined after WWII. What brands should you look for? Historically there were a lot of hand saw makers, because saws are easier to manufacture than hand planes. Here are some of the old and new quality saw makers (in alphabetical order). The blue links lead to eBay and other searches for those hand saw brands so you can compare different models (some of the antique brands are not always available on eBay, so keep checking back):
Woodworking is a great stress-reliever, art and hobby. But it takes a skilled hand, a sharp eye and plenty of patience to fully master the fundamentals of building with woods creatively. And I must admit, the journey isn’t as easy as it seems. So, I started searching online the easy yet inexpensive woodworking projects for beginners and came up with 45 on the list which we will talk later.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours. 

Build this Queen sized storage bed and pair it with your favorite headboard for a functional and attractive storage piece. This trendy storage bed looks adorable in the room, you can also modify it this bed with your choice. You don’t need to be a professional woodworker, only a few basics of woodworking can be enough to DIY this project. We are including source tutorial link as well as a video tutorial, so that you can take some help.

Whether you are a professional tradesman or a DIY home renovation enthusiast, you need a sharp and sturdy hand saw. One of the common types of manual cutting hand tools, a hand saw is a highly versatile tool that can be used for all sorts of indoor and outdoor projects, from woodworking to carpentry tasks, to home renovations or general maintenance jobs.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
My basic advice is to develop lots of connections with people. Most branches of woodworking are hard to sell without knowing the right people – especially when targeting the luxury furnishings or corporate markets. I started down this path with the idea that I might own my own shop but forgot about that once I’d accepted employment in the field. Since I was satisfied working for others, I didn’t bother making the connections, and now I’m so busy it’s hard to get away from the shop long enough to do so. That’s not the end of the world, as we’re still pulling in plenty of work. It just took longer to get there than it should have. For those considering a self-employed woodworking career, it’s a good idea to meet individuals who associate with the types of people that are likely to become future clients. Word-of-mouth is still a powerful form of marketing even in this age of internet.

They both are both nice, but neither cut quite as well as the “progressive pitch” Lie-Nielsen dovetail saw that I’d tried at one of my traditional woodworking classes. The Lie-Nielsen dovetail back saw had the perfect thickness and such a comfortable pistol grip. I finally realized that I had spent more money on two dovetail saws that didn’t quite satisfy me than I had on a perfect new Lie-Nielsen dovetail saw ($125). So I ordered this dovetail saw from Lie-Nielsen, and have loved it for many years (even after buying many more dovetail saws)!


With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.

This is probably one the easiest woodworking projects you will find here. Although easy, a doormat is an equally important and useful item for households. As you can see in the image below, you will only need some 2X2 wooden boards and rope to build a simple doormat. This doormat is mostly useful for outdoor and porch. It will easily remove all the mud from your shoes with just one wipe. It is also very easy to clean and looks fabulous even if it is dirty.
This design is oh-so classy and beautiful and it’s one of the finest woodworking projects you’ll want to build today! You can display potted flowers, a cute clock, and a couple of picture frames on this DIY circular wood shelf. It's effortlessly beautiful and easy to build! If you're also looking for Mother's Day crafts, you can include this on your list.

Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
Throughout the years I’ve read accounts of people who “discovered” hand planes and had it change their lives. “I was a cabinetmaker for 30 years” they write, “then I” read this article or took this class “and I sharpened my plane iron and now I know what I was missing for all those years”. As I write this I know many of you are nodding in agreement. I know that happened to you too. It happened to me too. 

[…] Easy woodworking projects diy ready. Want to try your skills in some easy woodworking projects? Whether you’re a beginner or an expert, you’ll find something to work on these wood craft ideas. Diy numbered wood slice coasters {easy sharpie. Create rusticchic numbered wood slice coasters with a simple stencilandsharpie method for decor and. 15 diy wood burning projects wood burning art. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy. Project gallery diy/crafts the happier. I love all these ideas but don’t have time to print them all. Do you by chance have a book of your crafts. Easy diy and crafts all about diy and crafts. The summer is already here, so where would you rather spend the rest of your hard day at work than at. 31 insanely easy and clever diy projects. Diy 31 insanely easy and clever diy projects. These are the kind of simple projects for the laziest and. 15 diy wood burning projects wood burning art diy ready. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy wood burning projects. Get into wood burning art. 15 creatively genius diy wood walls diy & crafts. These 15 themed wood walls are not only easy to diy, they’re relatively cheap. In fact, some of them may not cost you anything at all. How’s that for frugal? […]


Gripping the hand saw is effortless and easy to control even when you are working with hard wood as the thick plastic handle has an ergonomically designed rubber grip which is comfortable to hold and helps to reduce any slipping. A versatile hand saw, it can be used for DIY renovations or carpentry jobs as the back of the saw can be used to mark 45 and 90-degree angles for quick and easy measuring.
Initially I thought a wine rack would be a finicky project to create, with the necessity of holding the bottles at a certain angle, etc. However, this ended up being a quick, easy and fun build. The shape of the bottles lets them rest on the rack at the correct angle (which is really only important when you are going to let your wine age). The simplicity of the design also allows you to see the labels on the bottles.

You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
With two varieties, red and white, oak is known to be easy to work with and relatively strong. However, furniture makers often opt for white oak over red oak for its attractive figure and moisture-resistance.[12] Depending on the kind needed, oak can probably be found at a local home center or a lumberyard for a bit pricier than other hardwoods.[12][13]
×